Coming Soon
Home > Forum


Author Topic: 2004 RM250. IRIN program bike.  (Read 4541 times)

0 Members and 1 Guest are viewing this topic.

Offline redrider611

  • Expert
  • ****
  • Posts: 124
    • View Profile
2004 RM250. IRIN program bike.
« on: April 15, 2011, 09:55:15 PM »
Bike is officially up for sale now. A friend of mine was going to list it on ebay for me but cant do it at thins time.

Aftermarket parts / mods list:
RG3 Upper / lower triple clamps
Tag XTi 1-1/8 bars
MSR clutch lever / perch
HEL Braking brake lines with billet banjo bolts
Renthal grips
Sunline cables
Moto Hose white hose kit (complete with vent tubes)
Dr D hour meter
FMF Factory fatty pipe
FMF power core shorty silencer
Rear Tag sprocket
Sunstar front sprocket
RK chain
Numara piston
Moose rims
Pro wheel spokes
All new All Balls racing bearings through the bike
Outlaw racing F/R brake rotors
Outlaw racing F/R brake reservoir caps
Outlaw racing Oil fill cap
Outlaw racing rim lock caps
Outlaw racing valve stem caps
Outlaw racing axle blocks
Outlaw racing shift lever
Uni filter

Additional mods:
Hardcoat anodized fork tubes
Hardcoat anodized shock body
Anodized suspension links and carrier
Anodized chain guide
Anodized exhaust brackets
Anodized shock bits
Hardcoat anodized brake calpiers
Ceramic coated fork lugs
Soda blasted and clear coated cases

Asking $5500


















 
Soil is for farming, Dirt is for racing

"real bikes have one chain"

Offline keeptwostrokesalive

  • Professional
  • *****
  • Posts: 428
    • View Profile
Re: 2004 RM250. IRIN program bike.
« Reply #1 on: April 22, 2011, 01:32:43 PM »
You should put this on ebay if you want to get that much money for it. I sure wish I had $5500 so I could by that beauty.

Offline snowboarderro

  • Professional
  • *****
  • Posts: 342
    • View Profile
Re: 2004 RM250. IRIN program bike.
« Reply #2 on: April 22, 2011, 03:02:33 PM »
awsome job

Offline redrider611

  • Expert
  • ****
  • Posts: 124
    • View Profile
Re: 2004 RM250. IRIN program bike.
« Reply #3 on: April 27, 2011, 10:45:42 AM »
Thanks guys. I will most likely go to ebay this weekend. I am open to offers as well.
Soil is for farming, Dirt is for racing

"real bikes have one chain"

Offline MyckMcClung

  • Professional
  • *****
  • Posts: 812
    • View Profile
Re: 2004 RM250. IRIN program bike.
« Reply #4 on: April 27, 2011, 01:24:53 PM »
The only thing I see that bothers me is the brake lines. the rear is hanging out pretty far, and the front has alot of slack between the caliper and the clamp on the fork guard, I'd tighten it up a bit.
If a pair of 2" brass balls isn't working, I doubt that the 3" model will make much difference.

Offline redrider611

  • Expert
  • ****
  • Posts: 124
    • View Profile
Re: 2004 RM250. IRIN program bike.
« Reply #5 on: April 27, 2011, 07:36:34 PM »
The only thing I see that bothers me is the brake lines. the rear is hanging out pretty far, and the front has alot of slack between the caliper and the clamp on the fork guard, I'd tighten it up a bit.

No way to tighten them. On the front I would need to cut the shrink wrap and move the sleeve. the rear is better now that it has had tome to lay out flat. USPS smashed the box and curled the rear line some.
Soil is for farming, Dirt is for racing

"real bikes have one chain"

Offline MyckMcClung

  • Professional
  • *****
  • Posts: 812
    • View Profile
Re: 2004 RM250. IRIN program bike.
« Reply #6 on: April 28, 2011, 07:31:44 AM »
Just sayin, if that's what you got it's what you got. Still a sweet scoot.
If a pair of 2" brass balls isn't working, I doubt that the 3" model will make much difference.

Offline scotty dog

  • Professional
  • *****
  • Posts: 599
  • because golf courses should be motocross tracks!
    • View Profile
Re: 2004 RM250. IRIN program bike.
« Reply #7 on: April 28, 2011, 08:51:58 AM »
niiiiiiiiiiice, very nice.... ;D
F**K THE WHALES......................SAVE THE 2 STROKE!!!!

The hardest part about riding a 4 stroke is telling your parents your Gay!!

05 CR 250

Offline redrider611

  • Expert
  • ****
  • Posts: 124
    • View Profile
Re: 2004 RM250. IRIN program bike.
« Reply #8 on: April 28, 2011, 09:04:00 AM »
Again, Thanks guys. The sad part is that so many people told me if it were a 450 or 250f they have bought it already.  :'(
Soil is for farming, Dirt is for racing

"real bikes have one chain"

Offline Coop

  • Global Moderator
  • Professional
  • *****
  • Posts: 2183
    • View Profile
Re: 2004 RM250. IRIN program bike.
« Reply #9 on: April 28, 2011, 11:34:58 AM »
Again, Thanks guys. The sad part is that so many people told me if it were a 450 or 250f they have bought it already.  :'(

Yeah and if it WAS a 450 or 250F they would tell you "if it was a two stroke I would buy it", people are bs'ers, don't let the comments get you down  :)
- Mike - Don't take life so seriously, nobody gets out alive.

Offline redrider611

  • Expert
  • ****
  • Posts: 124
    • View Profile
Re: 2004 RM250. IRIN program bike.
« Reply #10 on: April 28, 2011, 04:17:34 PM »
Again, Thanks guys. The sad part is that so many people told me if it were a 450 or 250f they have bought it already.  :'(

Yeah and if it WAS a 450 or 250F they would tell you "if it was a two stroke I would buy it", people are bs'ers, don't let the comments get you down  :)

Seriously coop, I know these people well. I do all of their work. They are die hard 4 stroke people. :(
Soil is for farming, Dirt is for racing

"real bikes have one chain"

Offline MyckMcClung

  • Professional
  • *****
  • Posts: 812
    • View Profile
Re: 2004 RM250. IRIN program bike.
« Reply #11 on: April 29, 2011, 06:43:49 AM »
That's good for you, take that money from the "flock".
There are alot of die hard 4 stroke folks out there from before the 4 stroke take over.
The ones I know hate the new 4 stroke MX bikes, and refuse to own anything with radiators, lmao. I don't blame them. 8)
If a pair of 2" brass balls isn't working, I doubt that the 3" model will make much difference.

Offline redrider611

  • Expert
  • ****
  • Posts: 124
    • View Profile
Re: 2004 RM250. IRIN program bike.
« Reply #12 on: April 29, 2011, 07:19:47 AM »
That's good for you, take that money from the "flock".
There are alot of die hard 4 stroke folks out there from before the 4 stroke take over.
The ones I know hate the new 4 stroke MX bikes, and refuse to own anything with radiators, lmao. I don't blame them. 8)

Haha, These people came off of 125 and 250 smokers. Once they rode a four stroke it was over. They have yet to break a rod or trash a head. Maybe when that happens they will see the light again. LOL
Soil is for farming, Dirt is for racing

"real bikes have one chain"

Offline MyckMcClung

  • Professional
  • *****
  • Posts: 812
    • View Profile
Re: 2004 RM250. IRIN program bike.
« Reply #13 on: April 29, 2011, 09:19:29 AM »
hmmm, keep them tuned up and keep food on the table
or
starve and convert the masses
????
perplexing :-\
do the names Peter and Paul come to mind??
If a pair of 2" brass balls isn't working, I doubt that the 3" model will make much difference.

Offline redrider611

  • Expert
  • ****
  • Posts: 124
    • View Profile
Re: 2004 RM250. IRIN program bike.
« Reply #14 on: April 29, 2011, 03:44:46 PM »
hmmm, keep them tuned up and keep food on the table
or
starve and convert the masses
????
perplexing :-\
do the names Peter and Paul come to mind??


Nicely put

Will be going to ebay tonight.
« Last Edit: April 30, 2011, 06:35:44 AM by redrider611 »
Soil is for farming, Dirt is for racing

"real bikes have one chain"