Be sure to find us on fb,Twitter and YouTube!
0 Members and 3 Guests are viewing this topic.
Ha Ha, Duh Ford, it is an 07 KX250 ,the forks ARE flush with the clamps. Pro Circuit doesn't have the link in stock, and they don't have any plans to produce more, I can't find anyone who does stock it. I had my suspension guru valve the shock knowing about the extra 10- 15mm of sag and the spring being 1 rate stiffer for my weight, it's real good now.If you can find one even used, send me a link, I will sell a kidney if I have to.
No I haven't. But I'll pass on it. Since I had the suspension re valved, and installed the proper rate fork springs for my weight. It is now the best handling bike I have ever ridden in the conditions I ride. I reset the sag to 110mm (from 115mm) as it was feeling a little sluggish turning in the tight stuff since the fork no longer dives going into turns. This took a little getting used to for sweepers with Ginormous brake/acceleration mounds at the apex but it became second nature after a few miles.