Coming Soon
Home > Forum


Author Topic: YZ125 2006 Front wheel assembly...  (Read 3534 times)

0 Members and 1 Guest are viewing this topic.

Offline Seba92mx

  • Posts: 0
    • View Profile
YZ125 2006 Front wheel assembly...
« on: November 28, 2013, 11:38:18 PM »
Hello. In my YZ 125 2006 i have front wheel from some husqvarna.
Wheel doesn't fit very well and front forks aren't symmetric.
Brake disc looks good in brake caliper, but bushing from other side stops on axis (you know, it is bigger on one side)
Black- axis
light gray- bushings
gold- hub
fi25 and fi 20 are diameter of axis.



It should looks like that? Maby I should buy wheel from yz 125?
What should be the dimension between forks (on axis) to it stay symmetrical?
« Last Edit: December 31, 1969, 04:00:00 PM by ' »

Offline TMKIWI

  • Professional
  • *****
  • Posts: 1634
    • View Profile
YZ125 2006 Front wheel assembly...
« Reply #1 on: November 29, 2013, 06:01:42 AM »
You may have to machine up some new wheel spacers.
The forks must sit parallel when the wheel is done up.
« Last Edit: December 31, 1969, 04:00:00 PM by ' »
If you don't fall off you are not going hard enough

Offline Seba92mx

  • Posts: 0
    • View Profile
YZ125 2006 Front wheel assembly...
« Reply #2 on: November 29, 2013, 01:19:12 PM »
Ok. But bushing on the left side on picture shouldn't have contact with fork?

What are the dimensions of OEM wheel spacers?
« Last Edit: December 31, 1969, 04:00:00 PM by ' »