Coming Soon
Home > Forum


Author Topic: trail riding yz80  (Read 5483 times)

0 Members and 1 Guest are viewing this topic.

Offline yz80ripper

  • Posts: 0
    • View Profile
trail riding yz80
« on: May 06, 2013, 02:48:38 AM »
I recently bought a bone stock 2000 yz80 and was hoping to trail ride it, unfortunately, the bike is incredibly difficult to deal with at low speeds in tight sections. Does anyone know of any cheap or free mods to allow for more low end power? (other than a sprocket change)
« Last Edit: December 31, 1969, 04:00:00 PM by ' »

Offline riffraff

  • Professional
  • *****
  • Posts: 487
  • Still smokin' after all these years
    • View Profile
trail riding yz80
« Reply #1 on: May 06, 2013, 03:06:07 AM »
Torque spacer might help, could make one pretty easy
« Last Edit: December 31, 1969, 04:00:00 PM by ' »
aaahhhhh yes, I remember the good old days

Offline eprovenzano

  • Professional
  • *****
  • Posts: 617
    • View Profile
trail riding yz80
« Reply #2 on: May 06, 2013, 01:33:27 PM »
Flywheel weight?  Check Steahly Offroad to see if there is a flywheel weight for your bike.

www.steahlyoffroad.com/?
« Last Edit: December 31, 1969, 04:00:00 PM by ' »
Eric Provenzano
2019 KTM 300 XCW TPI
2000 KTM 300 EXC (Son's)
2001 KTM 380 EXC
Sold 1991 KDX 200... fun play bike
Sold 1999 KX250
Sold 1999 YZ125 (son's)
Sold 2001 Yamaha TTL 125 (son's 1st bike)
Sold but never forgotten 1974 Honda Elsinore CR250M
Sold 1974 Honda Elsinore CR125

Offline cnrcpla

  • Novice
  • *
  • Posts: 0
    • View Profile
trail riding yz80
« Reply #3 on: May 06, 2013, 01:35:45 PM »
It's a small bore two stroke, I'm not sure how much bottom end power you'll be able to squeeze out of it. The right pipe combo might help, also porting it for low end power would, but those are a bit pricey.
« Last Edit: December 31, 1969, 04:00:00 PM by ' »

Offline Coop

  • Global Moderator
  • Professional
  • *****
  • Posts: 2183
    • View Profile
trail riding yz80
« Reply #4 on: May 06, 2013, 01:37:05 PM »
There used to be a member on here that used to build bikes and was always talking about ways to make small two strokes run more like a four stroke for woods riding. Something with the reeds I think. Anybody remember him?
« Last Edit: December 31, 1969, 04:00:00 PM by ' »
- Mike - Don't take life so seriously, nobody gets out alive.

Offline yz80ripper

  • Posts: 0
    • View Profile
trail riding yz80
« Reply #5 on: May 06, 2013, 11:49:11 PM »
thanks, im definitely gonna try the torque spacer and maybe a flwheel weight, ill let you know how it goes after the next time i go riding.
« Last Edit: December 31, 1969, 04:00:00 PM by ' »

Offline SachsGS

  • Professional
  • *****
  • Posts: 1235
    • View Profile
trail riding yz80
« Reply #6 on: May 07, 2013, 02:51:25 PM »
I've found that the porting pretty much typifies the machine, in other words, it will be (very) difficult to find low end power in a machine tuned for top end.
« Last Edit: December 31, 1969, 04:00:00 PM by ' »

Offline citabjockey

  • Expert
  • ****
  • Posts: 145
    • View Profile
    • Yamaha Vintage Enduros
trail riding yz80
« Reply #7 on: May 07, 2013, 03:11:10 PM »
Step one, different sprockets.
Step two, make sure your clutch plates are in really good shape. You will use them a lot.
Step three, have a blast!

You have the absolute lightest trail bike out there! It will not be as forgiving of engine usage mistakes but if you can master it you can ride ANYTHING in the woods!

« Last Edit: December 31, 1969, 04:00:00 PM by ' »
Yamaha CT3, RT3, MX125, SC500, Toy Prius, Diesel F250 (it all balances out)

Offline eprovenzano

  • Professional
  • *****
  • Posts: 617
    • View Profile
trail riding yz80
« Reply #8 on: May 07, 2013, 03:27:00 PM »
Step one, different sprockets.
Step two, make sure your clutch plates are in really good shape. You will use them a lot.
Step three, have a blast!

You have the absolute lightest trail bike out there! It will not be as forgiving of engine usage mistakes but if you can master it you can ride ANYTHING in the woods!

Citabjockey is right (wow that was hard to type  ;D) You many want to lower your gearing by either dropping a tooth on the from or adding teeth to the rear.  Bur most of all, see step 3 "have a blast!"
« Last Edit: December 31, 1969, 04:00:00 PM by ' »
Eric Provenzano
2019 KTM 300 XCW TPI
2000 KTM 300 EXC (Son's)
2001 KTM 380 EXC
Sold 1991 KDX 200... fun play bike
Sold 1999 KX250
Sold 1999 YZ125 (son's)
Sold 2001 Yamaha TTL 125 (son's 1st bike)
Sold but never forgotten 1974 Honda Elsinore CR250M
Sold 1974 Honda Elsinore CR125

Offline gpnewhouse7

  • Posts: 0
    • View Profile
trail riding yz80
« Reply #9 on: May 09, 2013, 01:06:09 AM »
Honestly the easiest and cheapest way to get bottom end from a yz is to swap it for an rm, the rm has a powervalve and the yz doesnt so the rms power is spread out a lot more. Trust me I had both.

Motocross yz is best, but enduro is where the rm begins to kick ass.
« Last Edit: December 31, 1969, 04:00:00 PM by ' »

Offline Rm125guy

  • Posts: 0
    • View Profile
trail riding yz80
« Reply #10 on: May 30, 2013, 09:27:34 PM »
Honestly you won't be able to get much torque, if any at all, out of a yz80. Is it jetted right?
« Last Edit: December 31, 1969, 04:00:00 PM by ' »