Coming Soon
Home > Forum


Author Topic: WTB: 1-1/8" bar mounts  (Read 1472 times)

0 Members and 1 Guest are viewing this topic.

Offline Coop

  • Global Moderator
  • Professional
  • *****
  • Posts: 2183
    • View Profile
WTB: 1-1/8" bar mounts
« on: January 11, 2011, 12:28:16 PM »
A friend of mine is giving me some bars for my KDX, but they 1-1/8". So I need some mounts. I don't care if they are the whole mounts that bolt through the triple, or those adapters. I also don't care if they are off a different brand, I am pretty good and making parts work  :) . I know places to buy them new, but I figured I'd check around for used ones first since I am always on a tight budget.
- Mike - Don't take life so seriously, nobody gets out alive.

Offline Charles Owens

  • Professional
  • *****
  • Posts: 756
    • View Profile
    • Two Stroke Motocross
Re: WTB: 1-1/8" bar mounts
« Reply #1 on: January 11, 2011, 12:34:17 PM »
I have an Applied Upper from a 97 RM 125, for 1 1/8. No idea if they fit a Kawi.

Offline Coop

  • Global Moderator
  • Professional
  • *****
  • Posts: 2183
    • View Profile
Re: WTB: 1-1/8" bar mounts
« Reply #2 on: January 11, 2011, 12:54:54 PM »
If it's the whole upper triple I would be surprised if it will. The 1997 RM's had conventional forks, but I am sure they are bigger than the 43mm ones on this KDX.
- Mike - Don't take life so seriously, nobody gets out alive.

Offline mj4trax

  • Junior
  • **
  • Posts: 39
  • more than 2 strokes is playing with yourself
    • View Profile
Re: WTB: 1-1/8" bar mounts
« Reply #3 on: January 17, 2011, 10:53:42 AM »
Pro Taper makes aftermarket mounts to replace the OEM ones or to add on top. .   they list at ~ $40  Much cheaper than going the OEM route.
2003 RM250
2004 RM250
2001 yz125
1986 trx310R
1989 trx250R

Offline MyckMcClung

  • Professional
  • *****
  • Posts: 812
    • View Profile
If a pair of 2" brass balls isn't working, I doubt that the 3" model will make much difference.