Coming Soon
Home > Forum


Author Topic: Magnetic Oil Drain Bolt  (Read 2276 times)

0 Members and 1 Guest are viewing this topic.

Offline YZ250

  • Junior
  • **
  • Posts: 35
  • I'll live forever, or die trying!
    • View Profile
Magnetic Oil Drain Bolt
« on: August 31, 2010, 04:25:36 PM »
A few months ago, i had a problem in my engine that caused some internal gears to grind away part of my engine casing. this resulted in loads of tiny metal filings floating around in my engine oil. my mechanic said that i have to keep changing the oil until all the metal filings were gone. so for six months now i have been draing my oil every other ride and throwing new stuff in. this is rather expensive even when you buy the cheap oil and it's annoying. so i had heard of magnetic oil drain bolts and that got me thinking, instead of buying one becuz i have no money, would it be possible to weld a small magnet on to my drain plug? this would aid alot in getting the metal filings out of my engine if i could do it. any suggestions?

Offline motomike894

  • Expert
  • ****
  • Posts: 132
    • View Profile
Re: Magnetic Oil Drain Bolt
« Reply #1 on: August 31, 2010, 05:03:12 PM »
You could probably do that, but you can get those for like $10-$15 bucks you gotta have that laying around.

My dad owns a small shop, and he has several companies that we can get them for that or less cost.


Offline TMKIWI

  • Professional
  • *****
  • Posts: 1634
    • View Profile
Re: Magnetic Oil Drain Bolt
« Reply #2 on: August 31, 2010, 05:51:55 PM »
Just buy one. You cant weld a magnet.
You could drill a hole on the inside of the plug and glue a magnet in.
If you don't fall off you are not going hard enough

Offline Charles Owens

  • Professional
  • *****
  • Posts: 756
    • View Profile
    • Two Stroke Motocross
Re: Magnetic Oil Drain Bolt
« Reply #3 on: August 31, 2010, 05:55:08 PM »
I have a magnetic on my YZ 125, good investment for any bike. It is a cheap piece of mind. Just remeber that alluminum is not magnetic and a lot of parts that can come apart are just that.
Keep in the routine of changing the oil as fregquently as your wallet allows. :)

Offline opfermanmotors

  • Professional
  • *****
  • Posts: 1017
    • View Profile
Re: Magnetic Oil Drain Bolt
« Reply #4 on: August 31, 2010, 05:57:08 PM »
If you mess with it make sure the magent can't come off and get in the gears! 

also, generally as people say there is a hole drilled in and the magnet is a cylinder, this allows it to collect more than just a small magnet on top of the bolt and keeps the current of oil from pulling the pieces back into the waters since they are tucked inside the bolt.
Modest beginings start with a single blow of a horn, man.

Offline ACMX

  • Professional
  • *****
  • Posts: 1525
  • Andrew Cameron
    • View Profile
    • ACMX Productions
Re: Magnetic Oil Drain Bolt
« Reply #5 on: August 31, 2010, 08:07:00 PM »
Funny this was brought up, I just bought one two days ago.
ACMXProductions.weebly.com <-- Check it out! Now!

'Forgive me lord for I have sinned. I hit a fourth gear jump in fifth gear pinned'

The Sweet Sound of a Yz125 Two Stroke
http://www.youtube.com/watch?v=TSO3Po7uvJo

'If it takes more than two strokes, then you're just playing with