Coming Soon
Home > Forum


Author Topic: Where is the air screw on my 2004 yz250?  (Read 2203 times)

0 Members and 1 Guest are viewing this topic.

Offline Braap257

  • Expert
  • ****
  • Posts: 149
    • View Profile
Where is the air screw on my 2004 yz250?
« on: August 20, 2010, 11:04:12 AM »
The only screw i find that can be adjusted has a spring in it and i figure thats idle. where is the air mixture screw?

Offline ford832

  • Professional
  • *****
  • Posts: 1532
  • I PITY THE FOOL THAT RIDES A FOURSTROKE
    • View Profile
Re: Where is the air screw on my 2004 yz250?
« Reply #1 on: August 20, 2010, 11:40:58 AM »
Directly below it.A little brass screw that sits flush rather than stick out like the idle screw.
I'd rather a full bottle in front of me than a full frontal lobotomy.

Offline MXLord327

  • Expert
  • ****
  • Posts: 215
    • View Profile
Re: Where is the air screw on my 2004 yz250?
« Reply #2 on: August 20, 2010, 01:34:56 PM »
On my '98 YZ250, the idle screw is also the choke plunger, it rotates to change the idle.  The air screw is the only one on the side of the carb.

Offline Hondacrrider

  • Professional
  • *****
  • Posts: 433
    • View Profile
Re: Where is the air screw on my 2004 yz250?
« Reply #3 on: August 20, 2010, 04:17:49 PM »
Would this be any different for my 2001 cr125? It has a mikuni carb.
I'd rather be riding...

Offline RideRedMx2

  • Expert
  • ****
  • Posts: 157
  • HRC FACTORY RACING
    • View Profile
    • http://www.facebook.com/profile.php?id=100000301824082&ref=profile
Re: Where is the air screw on my 2004 yz250?
« Reply #4 on: August 20, 2010, 05:58:54 PM »
It should be right above the float bowl,left side of carb back by the clamp that goes on the airboot its a small slotted screw that sits flush in the carb body....should be 1 1/2 to 2 turns out from fully bottomed as a starting spot

Honda CR-250R #2.....Vet Class
CycleNation Powersports...Cycle Center Of Denton...HRC Factory Racing