hello everyone.
I have just joined this forum for the purpose of trying to solve my yz250 issue.
Ok so i have a 2002 yz250 that suddenly lost power one day, it was running great then all of a sudden the engine refused to have any power in the higher gears, the bike runs great in 1st 2nd and then when im at high revs in 3rd it bogs down quite alot, it still accelerates but just not as it normally should, nor does it sound good at all,
1.The engine has a fresh top end, piston and rings, less than 1 hour on it.
2.fresh set of reeds less than 15mins on them
3.rebuild kit in carb including new float,
4.i believe its a 175 jet and on the 2nd clip for needle.
5.power valve was cleaned, i believe this is working fine.
6.carb has been cleaned many of times.
i have also noticed a grey oil that seems to gather round the carb, which is visable when the carb is removed.
could the crank seals have gone?
could it be the tpi?
I am pretty new to 2 stroke so any help from you guys would be appreciated