Messages

46

Technical / Plug numbers and tip

« on: July 15, 2012, 08:07:21 PM »

If it fouls plugs you may need to go down on the idle jet..

and as for the spark plug.. it isn't easy if you don`t post the  name on the plug

 it may have different resistance

47

Vintage Two Strokes / 84 Maico 250

« on: July 15, 2012, 06:01:27 PM »

found a brochure scan of 1984  250

it had drum breaks

48

Technical / Piston Failure

« on: July 14, 2012, 03:46:26 PM »

not sure if its just the light..

but it looks looks like it hit the head too..

have you checked the play on the con rod ?

49

Technical / 2001 TM RAcing 125mx Piston meltdown

« on: July 13, 2012, 09:10:46 PM »

tm come stock whit base gaskets  in 4 sizes in the gasket kits..

maybe you got the thinest of them

50

Non-Moto / Forum question

« on: July 13, 2012, 09:06:12 PM »

thanks for all the ideas..

don`t know why but it works now.


 

51

Photos & Videos / Bike abuse at it''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s finest

« on: July 04, 2012, 12:55:36 AM »

you guys should watch this video too

<iframe width="420" height="315" src="http://www.youtube.com/embed/_sI05D8Mcy0" frameborder="0" allowfullscreen></iframe>

52

General Two Stroke Talk / anyone come up with a better mousetrap?

« on: July 01, 2012, 05:24:02 PM »

i  have rounded some too.

what i did was grind down to next smaller size socket, just a Thad bigger so you knock it on..

Another way i did was much more simple, I took of clutch cover and drained that way.

It may work if you don`t get a replacement

53

Non-Moto / Forum question

« on: June 25, 2012, 09:42:27 PM »

Doesn't work.

also this pc is brand new


so i am guessing it user rights
or someone having my ip before me got banned


because it happened suddenly

54

General Two Stroke Talk / New YZR 500cc Fuel Injected 2 Stroke - Finally here....

« on: June 22, 2012, 08:17:05 PM »

One idea for the real gizmo geek on this bike...

The guy keeps talking about keeping the front end down. wonder if its possible to put some sort of accelerometer and/or gyro system in it so it would not let the front end higher than a set amount (45 degrees?) before it starts cutting power. Then you could pin it all you want and never worry about a loop. Wonder if anyone has ever tried that before?

Nice idea  But it would only be useful on starts.  It would be real scary jumpin nose high, and having bike die

55

General Two Stroke Talk / 2013 Husqvarna''''''''s

« on: June 18, 2012, 07:48:05 PM »

you can check out the enduro models here


https://www.press.bmwgroup.com/pressclub/p/pcgl/pressDetail.html?outputChannelId=6&id=T0127612EN&left_menu_item=node__6762

56

General Two Stroke Talk / Stuff that works and stuff that, not so much

« on: June 17, 2012, 11:59:18 PM »

Han problems whit handlebar grips. did try everything from pillow tops o renthals..

but the grips that helped my hands was progrip 791

I just off set the gel so that i right place when twisted the throttle


I had 2 fly chest protectors. fits good.. (but both broke allmost new, bad plastic)
my ufo protector  lasted 10years

57

Non-Moto / Forum question

« on: June 14, 2012, 12:40:40 PM »

It still wont work..



But i can see the board when i log off..



so i looks like is something whit my user.

58

General Two Stroke Talk / FINALLY, an industry insider (GP MEchanic) drops the Honda bomb. Straight up.

« on: June 08, 2012, 02:41:01 PM »

jeram 

i think your right. since honda owners seem to be the most brand loyal

59

General Two Stroke Talk / The Euro''''''''''''''''s advance while Yamaha''''''''''''''''s BNG''''''''''''''''s only falls farther behind.

« on: June 08, 2012, 02:38:13 PM »

I like the Yamaha front forks..
but paying twice the amount of money as a uses yz, and just getting new sticker.. Just isnt worth my money..

this is yamaha`s problem right now... people look for used yz instead of new. when design gets so stale

60

General Two Stroke Talk / MX3 World Championship

« on: June 05, 2012, 12:53:27 AM »

the cc should not be the same as the main class..
then there is no point in calling it mx3

in my opinion..