Hello, I've bought a 2003 cr125 this past summer, I rode it for 2 days and checked the piston because there was low compression, I found out the piston was fried, I finally just bought a weisco top end kit and installed it. I filled the bike with all new oils(Coolant and trans). I put a brand new plug in it. Started it up and started 2 kicks later, ran perfect, but there was still low compression. I started the break in process, but when I was putting around the backyard the old chain snapped. I put the bike away and it sat in the shed in 30-20 degree weather, it finally warmed up abit and I finally got a new chain, the bike would not start though, I kicked and kicked, choak on choak off, it just wouldn't turn over, close but would not start, I put fresh 32-1 gas and honda pro oil in the tank before hand, I cleaned the carb and air filter, tried starting it again, won't start, I kicked and kicked for 45 minutes, nothing. Any help will be great. Very frustrated and don't want to bring it to a shop