Coming Soon
Home > Forum

Author Topic: PARTS!!!  (Read 88 times)

0 Members and 1 Guest are viewing this topic.

Offline Mattyweb01

  • Novice
  • *
  • Posts: 2
    • View Profile
« on: July 09, 2018, 02:39:04 AM »
Hi all..
I have a 1989 Cr 250 and the forks are pretty ruined on it, does anyone know if there are forks from other Cr models or any other bike that would fit mine??
Thanks Matt

Offline racer x

  • Expert
  • ****
  • Posts: 199
    • View Profile
Re: PARTS!!!
« Reply #1 on: July 09, 2018, 02:53:54 PM »
Im pretty sure the 88 will bolt on with the triple clamp from the 88, I think they were a better option at the time. You can look on for a variety of fork options just do a search

Offline rsmith

  • Administrator
  • Intermediate
  • *****
  • Posts: 98
    • View Profile
Re: PARTS!!!
« Reply #2 on: July 10, 2018, 09:32:58 PM »
This gets a bit complicated. According to the Honda parts catalog those were one year forks. As I recall from back in the day they were still trying to figure out what the best diameter was.

But... One of my riding buddies has a set of 04 forks on his 93 CR250. The key is you need all of the parts, forks, wheel, brakes and triple clamps.

As long as the steering stem is the same length and you can find bearings with the right combination of OD to fit the frame and ID to fit the steering stem you can mount them.

If you just want to bolt them on and go, look for a set of used ones for an 89. Bike Boneyard in Montana says they have them for $150 (they aren't so good at keeping up their site though, so contact them to confirm.)

Good luck.