PC splitfire bikes

[redrider611]

Just checking to see if any of you have one.
I have 4 that I will eventually restore from frame up.

Andrew Short (2001) complete running (Have original race worn 2001 jersey as well.
Tallon Vohland (2000) Frame, subframe, forks, shock, etc. Basically a roller minus small stuff. Have locked up motor as well
Mike brown (2001) Complete but complete torn down for resto.
Unknown rider (2002) complete minus forks and clamps. Torn down for resto. I believe it was one of Matt Walkers O2's.
I know Matt so I will check with him on the some of the parts.

I am always looking for PC parts for 99-02 KX125's. If you have anything to part with please let me know.

[dogger315]

I can hook you up with a pair of works Kayaba forks and a works Nissin front caliper.
Both are unrestored and I'm not sure parts are available for the caliper.

Those are the only KHI items I have that will fit the 125, everything else is 250 specific.
I'm pretty sure the PC bikes used kitted forks though, per the AMA rules for the 125 class.

dogger

[twosmoke595]

PLEASE POST PICS
i love those splitfire bikes

[motoxr377]

PLEASE POST PICS
i love those splitfire bikes

Yeah! You too, dogger!

Let's see some KHI unobtainium.

[redrider611]

For those of you that know these bikes, should know that Mitch had most of the Ti parts and some of the "works" parts removed before bikes got sold.

I do have the following in Ti that was left on the bikes.

Upper & lower shock bolts
fork guard bolts
triple clamp bolts
rear axles
Bar mount bolts
a few case bolts
 caliper pins
and few other pieces

Dogger is right on the susp. the 99-01 bikes were fitted with kit susp.
In 02 they got "works" forks.

A lot of these bike were not the same. Some ran the flo green powder coated frame and some did not.
All of mine have the flo frame except for Shorts bike.

I tried to post pics but it wont let me. It says file folder is full or file is too large.

Shorts 01 bike is the only one that is complete and running. The others are torn down for restoration.

[evo550]

There was a Jeremy McGrath 1991 ? 250 on ebay a while ago, went fairely cheap if I remember.

[dogger315]

A friend of mine wants to build a PC Splitfire KX.  He's in the parts gathering phase
right now.

Here are some pictures of the SR parts I mentioned:

Works Kayabas with a Titanium axle and steering stem.  The triples are Emig Racing.
Pro Circuit has all the parts and specs to rebuild these to new condition.


Works Magnesium Right side case cover for a 250.


Here's the works Nissin front brake caliper complete with a Magnesium carrier.


Some parts from Jeff Emig's and Sebastian Tortelli's SRs.  Note the trick hi capacity
fuel tank, the works shock behind the frame and a pair of works radiators.

There are enough parts here to make a serious start on a SR250 restoration - any
Kawasaki fans?

dogger

[redrider611]

I like the 250's but I am huge fan of the 99-02 125's.
BTW: Dogger, I sent you a PM

Thanks

[motoxr377]

There are enough parts here to make a serious start on a SR250 restoration - any
Kawasaki fans?

You write the post, I'll pop the popcorn!