Coming Soon
Home > Forum


« previous next »
Pages: [1]   Go Down

Author Topic: 2000 yz250 clutch  (Read 5461 times)

0 Members and 1 Guest are viewing this topic.

Offline Ralphy77

  • Posts: 0
    • View Profile
2000 yz250 clutch
« on: June 26, 2012, 06:35:49 AM »
I have a 2000 yz 250. I recently installed ASV levers on the bike and I am having trouble with my clutch. It does not seem to be engaging. Do I need to replace the clutch cable as well? Any assitance is greatly appreciated.
« Last Edit: December 31, 1969, 04:00:00 PM by ' »
Logged

Offline TMKIWI

  • Professional
  • *****
  • Posts: 1634
    • View Profile
2000 yz250 clutch
« Reply #1 on: June 26, 2012, 09:26:47 AM »
Sounds like the adjustment is out.
I would re-check it.
« Last Edit: December 31, 1969, 04:00:00 PM by ' »
Logged
If you don't fall off you are not going hard enough

Offline SachsGS

  • Professional
  • *****
  • Posts: 1235
    • View Profile
2000 yz250 clutch
« Reply #2 on: June 26, 2012, 02:32:12 PM »
2X.Check to make sure there is a little slack in the cable when the lever isn't pulled in.
« Last Edit: December 31, 1969, 04:00:00 PM by ' »
Logged

Offline Ralphy77

  • Posts: 0
    • View Profile
2000 yz250 clutch
« Reply #3 on: June 27, 2012, 06:26:05 AM »
I have adjusted it all the way out and there is still no slack. Does this mean I need a longer cable?
« Last Edit: December 31, 1969, 04:00:00 PM by ' »
Logged

Offline SachsGS

  • Professional
  • *****
  • Posts: 1235
    • View Profile
2000 yz250 clutch
« Reply #4 on: June 27, 2012, 03:03:42 PM »
Something is not right there.Recheck everything.There is no such thing as a "longer cable" and you would either have to make up a custom cable or find something else that would work.
« Last Edit: December 31, 1969, 04:00:00 PM by ' »
Logged

Offline Ralphy77

  • Posts: 0
    • View Profile
2000 yz250 clutch
« Reply #5 on: July 06, 2012, 09:01:44 AM »
It wouldn't surprise me if I have done something wrong, I am basically teaching myself everything as I go along. This bike was a complete wreck when I got it and I have been restoring it from the ground up. I have a manual for the bike but it is not a great one. Where can I find detailed instructions on how to properly adjust the clutch? Any advice is greatly appreciated.
« Last Edit: December 31, 1969, 04:00:00 PM by ' »
Logged

Offline TMKIWI

  • Professional
  • *****
  • Posts: 1634
    • View Profile
2000 yz250 clutch
« Reply #6 on: July 06, 2012, 09:10:09 AM »
You didn't by chance remove the clutch lever on the gearbox.?
It is on a spline and if put back on wrong the leverage ratio will be wrong.
Something to think about.
« Last Edit: December 31, 1969, 04:00:00 PM by ' »
Logged
If you don't fall off you are not going hard enough

Offline Ralphy77

  • Posts: 0
    • View Profile
2000 yz250 clutch
« Reply #7 on: July 07, 2012, 06:14:05 AM »
No I only removed the cable from the lever, but good to know thanos for the info.
« Last Edit: December 31, 1969, 04:00:00 PM by ' »
Logged
Pages: [1]   Go Up
« previous next »