Coming Soon
Home > Forum


Author Topic: YZ-250 parts  (Read 1540 times)

0 Members and 1 Guest are viewing this topic.

Offline Chazzer

  • Posts: 0
    • View Profile
YZ-250 parts
« on: June 02, 2012, 12:41:30 PM »
Parting out the entire bike - a 2000 YZ-250. Frame and sub frame just powdercoated.  Let me know what you need.
« Last Edit: December 31, 1969, 04:00:00 PM by ' »

Offline riffraff

  • Professional
  • *****
  • Posts: 487
  • Still smokin' after all these years
    • View Profile
YZ-250 parts
« Reply #1 on: June 02, 2012, 07:19:33 PM »
why are you parting it out?
« Last Edit: December 31, 1969, 04:00:00 PM by ' »
aaahhhhh yes, I remember the good old days

Offline Chazzer

  • Posts: 0
    • View Profile
YZ-250 parts
« Reply #2 on: June 02, 2012, 07:43:19 PM »
2000 YZ250 parts bike. This was going to be a project bike restoration until we found too many tranny gears should be replaced to do it right - making it cost prohibitive unless you have a tranny. Frame has fresh coat of Charcoal Powder-coat. Cylinder is scored but can be sleeved. Power Values ok, CAM is 3 thous off, with new bearings and arm (at machine shop, kenoconnorracing . com, now and can be balanced to OEM specs for $80. Engine casings good, forks, triple tree, rims, front tire, brakes, seat, new cables, carb cleaned and jetted, clutch is new, swing arm / suspension ok, plastics. The list goes on. Would like to sell the entire thing at once but will part it out as needed. I am not looking to make money on this - just as close to even as I can. Shipping costs will be the actual cost for what you buy. Let me know what you need. Thanks.
« Last Edit: December 31, 1969, 04:00:00 PM by ' »

Offline SSGHopkins

  • Novice
  • *
  • Posts: 0
    • View Profile
YZ-250 parts
« Reply #3 on: June 16, 2012, 10:27:45 AM »
how much for the radiators and plastics?
« Last Edit: December 31, 1969, 04:00:00 PM by ' »

Offline B-D1215

  • Posts: 0
    • View Profile
YZ-250 parts
« Reply #4 on: June 24, 2012, 02:49:52 PM »
How much for the left side of the crank case?
« Last Edit: December 31, 1969, 04:00:00 PM by ' »

Offline almedin21

  • Posts: 0
    • View Profile
YZ-250 parts
« Reply #5 on: July 16, 2012, 07:52:13 AM »
how much for the frame and subframe? do you have title?
email me please at vegas23@live.com and let me know if you still have it.
« Last Edit: December 31, 1969, 04:00:00 PM by ' »

Offline SSGHopkins

  • Novice
  • *
  • Posts: 0
    • View Profile
YZ-250 parts
« Reply #6 on: August 04, 2012, 07:30:54 PM »
has anyone heard back from him?
« Last Edit: December 31, 1969, 04:00:00 PM by ' »