Coming Soon
Home > Forum


« previous next »
Pages: [1]   Go Down

Author Topic: CR250 Rippin in FL  (Read 2962 times)

0 Members and 1 Guest are viewing this topic.

Offline Nospeed

  • Novice
  • *
  • Posts: 8
    • View Profile
CR250 Rippin in FL
« on: April 27, 2011, 04:56:16 AM »
Here is a short video of my kid rippin his CR250 at Waldo and Bostwick in FL.

http://www.youtube.com/watch?v=ZnHAeI2IjZ0
Logged

Offline MyckMcClung

  • Professional
  • *****
  • Posts: 812
    • View Profile
Re: CR250 Rippin in FL
« Reply #1 on: April 27, 2011, 08:43:01 AM »
Kids got some skill!!
Logged
If a pair of 2" brass balls isn't working, I doubt that the 3" model will make much difference.

Offline EJ

  • Professional
  • *****
  • Posts: 400
    • View Profile
Re: CR250 Rippin in FL
« Reply #2 on: April 27, 2011, 09:01:01 AM »
Nice stuff.
Logged

Offline ACMX

  • Professional
  • *****
  • Posts: 1525
  • Andrew Cameron
    • View Profile
    • ACMX Productions
Re: CR250 Rippin in FL
« Reply #3 on: April 27, 2011, 09:30:48 AM »
Fast guy!
Logged
ACMXProductions.weebly.com <-- Check it out! Now!

'Forgive me lord for I have sinned. I hit a fourth gear jump in fifth gear pinned'

The Sweet Sound of a Yz125 Two Stroke
http://www.youtube.com/watch?v=TSO3Po7uvJo

'If it takes more than two strokes, then you're just playing with

Offline Nospeed

  • Novice
  • *
  • Posts: 8
    • View Profile
Re: CR250 Rippin in FL
« Reply #4 on: April 27, 2011, 03:51:20 PM »
Thanks. He was on a Honda CRF250 until late last year. The four stroke was nice to ride but, as everyone on this site knows, costs too much to make it competitive. All the fast guys had thousands in motorwork to make it faster. The 05 CR250 with a pipe keeps up to the big $$ mod 250F's with no problem.
Logged

Offline TMKIWI

  • Professional
  • *****
  • Posts: 1634
    • View Profile
Re: CR250 Rippin in FL
« Reply #5 on: April 27, 2011, 06:55:07 PM »
Nice riding.
Logged
If you don't fall off you are not going hard enough

Offline Coop

  • Global Moderator
  • Professional
  • *****
  • Posts: 2183
    • View Profile
Re: CR250 Rippin in FL
« Reply #6 on: April 28, 2011, 04:15:06 AM »
Good stuff.
Logged
- Mike - Don't take life so seriously, nobody gets out alive.

Offline Super Trucker

  • Professional
  • *****
  • Posts: 377
    • View Profile
Re: CR250 Rippin in FL
« Reply #7 on: April 28, 2011, 01:58:29 PM »
The kids rippen, sounds crisp too. I know a  expert rider that has a couple cr250,s  his dad  said with the rad valve  the cr250 comes out of corners  stronger than the vforce  reed cage. I put a rad valve on my 06 cr125, nice improvement over the stock cage, low to mid is better, I  took it  apart and polished the inside smooth, then  put the rad valve on,good stuff.
Logged

Offline Nospeed

  • Novice
  • *
  • Posts: 8
    • View Profile
Re: CR250 Rippin in FL
« Reply #8 on: April 28, 2011, 06:35:10 PM »
Quote from: Super Trucker on April 28, 2011, 01:58:29 PM
The kids rippen, sounds crisp too. I know a  expert rider that has a couple cr250,s  his dad  said with the rad valve  the cr250 comes out of corners  stronger than the vforce  reed cage. I put a rad valve on my 06 cr125, nice improvement over the stock cage, low to mid is better, I  took it  apart and polished the inside smooth, then  put the rad valve on,good stuff.

Good input, thanks

Logged
Pages: [1]   Go Up
« previous next »