Messages

1

Technical / !!!!Please help me with this clutch case accident!!!!

« on: May 23, 2012, 07:39:30 PM »

Hey thanks guys...unfortunately I don't have the missing piece. I think what I'm going to do is put some type of metal epoxy as a short term fix and if it falls off or breaks off again then I'll split the cases and get it welded like SachsGS said. @xandyx yeah man this is the first time anything like this has happened to me...but I'm glad the chain didn't fall off or something and get jammed up in te case and crack it or damage it more than it did!

2

Technical / !!!!Please help me with this clutch case accident!!!!

« on: May 23, 2012, 03:42:49 AM »

I ride a 2001 CR125 and while I was riding I stopped and noticed this! I have no clue how it happened but any help will be appreciated! Can I fix this without buying a new case?? Anyways thanks!

3

Technical / Re: YZ 250 Engine Problem!!!

« on: October 04, 2011, 08:09:39 AM »

^ I will do this and get back to you! 

4

Technical / Re: YZ 250 Engine Problem!!!

« on: October 03, 2011, 06:10:31 PM »

Would that be enough to make it not start though??

5

Technical / Re: Black "water" out of the exhaust 04 RM 125

« on: October 03, 2011, 02:42:38 PM »

Pull the head pipe and see if there is any mystery liquid in that. If nothing run the bike with no header and see if any of the liquid comes out straight from the cylinder...

6

Technical / Re: YZ 250 Engine Problem!!!

« on: October 03, 2011, 02:36:23 PM »

That I have not!  What would be wrong or something to look for if there was a problem with them?

7

Technical / Re: YZ 250 Engine Problem!!!

« on: October 03, 2011, 02:21:28 PM »

Yeah fuel is in the carb and my buddy said it sputtered out...like as if you were to run outta gas. When we try and kick it over with no throttle it sounds completely dead but when you do a full throttle start it sounds like it has potential to start but doesn't.

8

Technical / YZ 250 Engine Problem!!!

« on: October 02, 2011, 10:09:44 PM »

Okay, so my buddy has a 1996 Yz 250. We were at the track today and were already riding for a good 30-45 minutes roughly. Then all of a sudden my buddy is on the side of the track so the problem is now the bike won't start! We checked the spark plug and it was pretty clean and also had spark, bike has compression, we checked the air filter which was dirty but not that bad to not start up again. We turned the fuel off and tried starting it with it full throttle and still nothing we tried bump starting it stilllll nothing!   We even tapped the float bowl on the carb a little bit because somebody said sometimes the pins gets stuck or something like that but we tried that and it didn't work...I'm out of ideas just about I mean the only thing left I'd say would be pull the carb and clean the jets in case a piece of dirt is in there, and if nothing after that pull the top end and check it out and see what's going on internally? Any help would be great thanks guys!

9

General Two Stroke Talk / Re: 2001 Cr 125 roach project!!

« on: September 20, 2011, 08:51:03 PM »

As a matter of fact I do know how!  but yeah thanks for the info I think I'll get started on rippin the shock apart tomorrow afternoon! I'll try and post some pictures and whatever to keep you guys updated with the ongoing project of this little diamond in the rough.

10

General Two Stroke Talk / Re: 2001 Cr 125 roach project!!

« on: September 20, 2011, 07:00:22 PM »

Heres a recent picture I took of it saturday after putting the new FMF exhaust on. Bike turned out found out that one of the compression clickers was seized so I put some PB in there let it sit and then heated it up and it works great again! I was super close to getting my suspension fully dialed in and then the damn shock blows...oh well got all the adjustments saved!

11

General Two Stroke Talk / Re: 2001 Cr 125 roach project!!

« on: September 20, 2011, 05:11:12 PM »

I've been searching for a good day now and I've been seeing that I need special tools? Some places say yes and some no...from what I read after you get the shock off the hardest part is finding a place with nitrogen to fill it up? Other than that it's not much different than a fork leg right??

12

General Two Stroke Talk / Re: Cool Aid

« on: September 19, 2011, 11:11:11 PM »

When I ride I ONLY drink water...Gatorade usually after I'm done. No soda type drinks for atleast 12 hours before riding..I feel like I get arm pump 10x easier...but that's just me. I drink Mtn dew normally and if I drink an energy drink it's usually rockstar punch which is like once a week maybe.

13

General Two Stroke Talk / Re: 2001 Cr 125 roach project!!

« on: September 19, 2011, 12:10:31 PM »

Well got the new FMF Fatty and Shorty mounted and rode the bike on the pala national track and long story short blew the rear shock seal...anyone know where I can find some info on how to rebuild it? I've never done a stick but I have done forks a couple times any info would be great! Thanks guys!

14

Technical / Re: CR125 Build up

« on: September 16, 2011, 12:43:40 PM »

Where'd you pick this bike up from it looks familiar for some reason...

15

General Two Stroke Talk / Re: 2001 Cr 125 roach project!!

« on: September 15, 2011, 10:42:11 PM »

The front fender is really a white one but I think its off a Yamaha lol...but the plastics are way worse in person...you can see the more red parts where the wrong graphics were and the pic of the bike in the garage of the right side is when I got the new plastics on and then the next ones are when I sparyed it down with CLR. But ill post some more pics tomorrow of the near end result!