Messages

1

Technical / tires

« on: October 09, 2012, 06:43:35 AM »

Hey fellas! Do you got any tire recommendations for my local mx track?
It consist mostly of loose gravel/sand and rocks..what I use now is some outdated pirelli scorpion extra or something :p only tried that tire so I don't have anything to compare to

2

Technical / 05 yz 250 clicker setup tips

« on: September 11, 2012, 08:21:21 AM »

I got  a yz 250 its sprung for my weight and the sag is set.
At my local track its sand/gravel terrain. lately ive been striving to get a more smooth and comfortable ride.anyone got any clicker suggestions on that type of terrain?
Also.. When I set say.. 14 rebound and 10 comp in the forks and 10 rebound and 14 comp in the shock.. how would that work?  less rebound in the fork and more in the shock ? Or doesn't matter ?

3

General Two Stroke Talk / ktm or yz

« on: August 01, 2012, 08:47:47 PM »

 okay but is the 2010 ktm a better handling bike than 06+ or the 05 ?

4

General Two Stroke Talk / ktm or yz

« on: July 31, 2012, 01:30:47 PM »

Allright.. But what about the ktms ergometics ? Im 6"1 tall ..how well will that suit a ktm? I'm leaning towards a 09-10 ktm if I get a good deal.but  will you get the suspension on par with the sss or close with a good revalve or? Tnx for all input btw I won't be sending them to factory connection since I live in Norway. but we have some good suspension gurus here

5

General Two Stroke Talk / ktm or yz

« on: July 30, 2012, 02:14:30 PM »

I really want a ktm. but I really like the power of the yz. what is so great about the ktm engine ? I was thinking 08-10 can't afford any newer

6

General Two Stroke Talk / ktm or yz

« on: July 30, 2012, 07:40:32 AM »

How much money I will be using on parts? As much as I need to plus some I don't need
So its just the suspension I got that could use an update? I'm pretty much satisfied with my motor after I installed a v-force 3 and a pc long silencer  but..the ktms looks so cool

7

General Two Stroke Talk / ktm or yz

« on: July 29, 2012, 08:28:02 PM »

Hey guys. I've got an 05 yz 250 and I'm thinking about getting a ktm. how is 08-10 ktm 250 2 strokes compered to the 05 yz 250 handling , power , suspension and all that stuff

8

Technical / v-force 3 assembly

« on: June 11, 2012, 10:47:08 PM »

Hey guys.im pretty sure I've got it right but. the v-force 3 assembly order. is it cylinder gasket > reed block > v3 gasket > spacer > v3 gasket > carb manifold ? Tnx in advance 

9

General Two Stroke Talk / Any Renner updates?

« on: April 14, 2012, 09:41:55 AM »

Nice go ricky

10

Technical / 05 yz upgrades

« on: February 21, 2012, 05:59:55 AM »

Oh yeah. I was thinking about that to. Would you reccomend the shorty or the standard?im thinking it could use some more mid to top end.but i dont want to loose anything from it. I dont want to give away some low to mid end for some mid to top end and vice versa. If you understand whisky i mean. But as far i have read me up on  you should not loose any low to mid with the standard pc silencer. Only gains from mid to top? Is that right?

11

Technical / 05 yz upgrades

« on: February 20, 2012, 10:19:44 PM »

Hey guys. looking for tips for parts to replace on my 05 yz 250. Got a gift card for 500$$ on btosports.com  plastic and graphics is covered.im thinking about the magura clutch system.but im not sure it will be worth it. i also wanna replace my stock rear rim with another a60 rim.(got the front) anyone got any input or experiences with the magura hyd clutch?

12

Technical / 05 yz 250 silencer

« on: February 08, 2012, 12:34:10 PM »

cool also.. will it make any difference in noise?

13

Technical / 05 yz 250 silencer

« on: February 08, 2012, 10:44:14 AM »

Hey guys. just wanted to know what is the best silencer for my yz. I ride only mx and im thinking i wanting a bit more mid to top end.can i run a pc 304 long with stovk pipe without loosing any bottom power? What is your opinions? and do i have to think about jetting with new silencer?

14

Technical / 05 yz 250 plastic

« on: October 13, 2011, 07:14:00 AM »

Hey! does anyone know if the 05 front plate does fit with the 06 front fender? and what exactly is the difference from the 05 front fender and 06 ?
is the 06 fender abit more pointy? tnx

15

Technical / white rims

« on: August 10, 2011, 01:16:47 PM »

Hey! anyone knows if you can get excel rims in white? or any tipe of rim for that matter, in white