Author Topic: Kx65 forks (Read 3229 times)

Fishnfinatic · « **on:** July 07, 2012, 04:40:31 PM »

So I need some input on my sons kx65 forks. For some reason they are stiff and sometimes get locked. I'm thinking there is air that's needs to be released. Any advice on what I should do? Any maintence?

SachsGS · « **Reply #1 on:** July 07, 2012, 08:52:41 PM »

When you say "locked" do you mean stuck partially compressed?Forks can build up air pressure and become stiff,I have to bleed my WPs often.

Fishnfinatic · « **Reply #2 on:** July 07, 2012, 08:59:22 PM »

Yes.

Fishnfinatic · « **Reply #3 on:** July 07, 2012, 09:10:26 PM »

How do you bleed yours?

SachsGS · « **Reply #4 on:** July 08, 2012, 01:23:30 AM »

If your forks are sticking they are bent.My WPs have bleed screws and I crack them,hear a little pfffttt, retighten and I'm done.

Coop · « **Reply #5 on:** July 08, 2012, 01:32:16 PM »

When is the last time they were serviced (internals cleaned, new seals, oil, etc.) ? Sachs may be right and they could be bent, post a pic if you can.

Fishnfinatic · « **Reply #6 on:** July 08, 2012, 05:09:46 PM »

Im trying to upload a pic but it won't let me choose a file.

Fishnfinatic · « **Reply #7 on:** July 08, 2012, 06:07:41 PM »

Im going to break them down. What kind of oil and how much do I use?

Coop · « **Reply #8 on:** July 09, 2012, 11:45:09 AM »

PM your email address. I have some info to email about the 65's I think you will find helpful!

Fishnfinatic · « **Reply #9 on:** July 10, 2012, 03:29:46 AM »

Thanks for the email Coop and everyone else!

News:

Author Topic: Kx65 forks (Read 3229 times)