Coming Soon
Home > Forum


Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - westsiderippa

Pages: 1 ... 11 12 [13] 14
181
General Two Stroke Talk / Re: WE NEED HELP!!!!!!!!!!
« on: December 20, 2009, 10:22:16 PM »
2t vrs 4t. heres a real race.....

Mike Morgan (Carnige Hill Climbs)

if you have never been here. its just a free for all of steep hills everywhere. such a fun place to push yourself to the edge. i grew up riding here and its a shame i might never get to ride here again. tons of park rangers might lose there jobs also. what a shame.

182
General Two Stroke Talk / WE NEED HELP!!!!!!!!!!
« on: December 20, 2009, 10:14:28 PM »
 www.carnegieforever.org

we are about to lose another state ohv park here in california. do to f-ing environmentalists. carnige park is located between tracy and livermore for those that dont know. its home of some of the greatest hillclimb comps. the peer group has found yet another loop hole to save a b.s. creek that runs about 4 weeks out of the year. we already lost clear creek, for those of you that dont know clear creek was awsome. if your from cali this should be a priority for you. we need your help.

a good day at carnegie

carnegie 10-20-09 CR250 HILLCLIMB CUSTOM BUILT TRICK CR 250

183
For Sale / 2000-2001 cr 250 parts for sale..
« on: December 20, 2009, 06:41:02 PM »
ill kick it off in this section. i have some stuff lying around from my new 01 cr and my old retired cr's so if your interested give me a call or an email. i dont want to get rich, just clean up the garage, lol. you pay for shipping and i will only use paypal. so here is the list and some pics i have for now...... again these parts are all off/for a 2000-2001 cr250, may fit other years but thats up to you to know.... let me know thanks Bryan, 831-818-2248.

-FMF "Q" spark arrestor/silencer. USED, unk amount of hours and has some small dents in the top of the end cap. pipe and mounts are straight, no cracks or leaks. its has the sticker on the one side and the other side sticker fell off. never been repacked. see pic. $30.00



these little dents are the only damage to the pipe....



-stock throttle tube. very little use, no cracks still has a like new oem stock grip on it. $10.00



-works skid plate, used with scratches, dings and wear marks on it. no cracks and its straight, with hardware $30.00





-stock oem clutch lever, perch, cable and dust cover. clean, minimal use, maybe 5hrs. $20.00



-stock oem bar mounts, minimal use, clean and straight, for 7/8 bars with hardware. $10.00



-makuni carb. this came off my new 01 cr250. the original owner put a kehin on right after purchase. has all vent tubes etc..i do not know the specs on the carb. $85.00





-front brake rotor plastic gaurd. oem honda plastic, has a few scratches but still has the glossy shine on it. no cracks with hardware. $10.00



2 sets of bars. first set, oem original stock 2001 cr250 7/8 bars with original oem grip on it. couple of scratchs from tie downs but thats it. they were never used more than a couple times. they are straight. $10.00

the second set is an older set of easton/protapers, not sure what the bend is on them. there used some scratches but are very straight. $15.00




184
Photos & Videos / Re: CR500 AFX Bikeporn!
« on: December 15, 2009, 10:56:35 PM »
ahh, got it, that is a beautiful bike.

185
Photos & Videos / Re: CR500 AFX Bikeporn!
« on: December 15, 2009, 09:42:32 PM »
im confused. SH is still producing the 500af right? so they are not using the 250f chassis anymore?

186
General Two Stroke Talk / Re: Who's is racing a late model 2T in 2010?
« on: December 15, 2009, 09:11:37 PM »
^^^^^ WOW^^^ so sick. beautiful bike.


187
Photos & Videos / Re: Front flip landed on dirt!
« on: December 15, 2009, 09:00:42 PM »
that was big, so was that number 2 to be landed. pretty sure dechamp from nitro circus has number 1 in the books yah? not nearly as big and sort of on a step though but he owns number 1 imo. he deserved it after that wicked crash attempt in the xgames best trick.

heres the pain and then the glory.

jim dechamp first fmx frontflip to dirt




188
Technical / Re: What two stroke pre mix is best?
« on: December 15, 2009, 05:38:51 PM »
if were giving suggestions, well then, i run 32:1 rock oil syn 2. i have ran it in my last 4 cr250's and have no complaints. its pricey and when mixing it with leaded 110. its very pricey but my bikes always run strong.

189
Photos & Videos / Re: got a new to me cr250
« on: December 15, 2009, 05:10:52 PM »
i found the bike locally here in the bay area. its a funny story because the guy i bought it from is a 2t fanatic. he has quite the collection of honda's. i net him last year when he was selling a mint condition 2002 cr 250 and i was very interested at the time do to already having an 01 and a 07. he sold the 02 and about a year went buy, i granaded my 01. sold the 07 and was on the hunt for another 01 to set up for the woods. everything i looked at was junk and then i saw the add for my bike. i gave the guy a call and as soon as i heard his voice i knew it was the same guy. small world you know!! anyway im super pumped on the bike and i met a new riding partner out of the deal, sweet!! the bike is at my suspension guy right now getting set up. i just ordered renthal twin wall rc highs, a magura clutch kit, putting some bridgestone 403/404 on her, putting 51 on the back with a heavy duty rk chain, changing the clutch plates to steel, and a few other things to make it woods ready for me. she should be all done by the end of the week and i will get a bunch of pics up. 

190
Photos & Videos / Re: brokeback mountain 2
« on: December 15, 2009, 11:50:51 AM »
oh cool, i was looking here first and didnt see it, last i looked i still saw the bubba vid. i know that vid your talking about with tedesco in it, im trying to look for you.

191
Photos & Videos / Re: brokeback mountain 2
« on: December 15, 2009, 11:20:39 AM »

192
Photos & Videos / Re: got a new to me cr250
« on: December 14, 2009, 11:05:07 AM »
thanks john. i really enjoy this site. its great. i will keep you up to date with the build she should be done this week. sorry for the delay in getting back to you. i had received your email just been real busy. anyway, if you have an apple and use firefox you should see thumbnails, if you use safari you will see links. as for using a PC im not sure.  ???

193
Photos & Videos / Re: got a new to me cr250
« on: December 13, 2009, 10:18:18 PM »
sorry was that bad? i have been browsing the site for quite some time just thought id share. but i guess i was out of line. and in my defence it would only let me upload 1 pic at a time.

194
Photos & Videos / Re: got a new to me cr250
« on: December 13, 2009, 10:00:43 PM »
and a pic of old faithful before her retirment....

195
Photos & Videos / Re: got a new to me cr250
« on: December 13, 2009, 09:59:16 PM »
here is a pic of the 07 i sold. really bumbed out about it but i just didnt want to put that bike in the woods. it ripped on the track but i just didnt like the power delivery compared to the 2001 motor. and the 2001 motor has never let me down in the middle of stonyford, lol.

Pages: 1 ... 11 12 [13] 14