Coming Soon
Home > Forum


« previous next »
Pages: [1]   Go Down

Author Topic: Talon hubs don't fit :-(  (Read 1924 times)

0 Members and 1 Guest are viewing this topic.

Offline JaredRM250

  • Posts: 0
    • View Profile
Talon hubs don't fit :-(
« on: May 05, 2013, 10:44:14 PM »
Hi guys,

A friend of mine is selling a very nice set of wheels but they were off a CRF250 is it possible to get some different spacers to make them fit my 2008 RM250?

Cheers,
Jared.
« Last Edit: December 31, 1969, 04:00:00 PM by ' »
Logged

Offline cnrcpla

  • Novice
  • *
  • Posts: 0
    • View Profile
Talon hubs don''t fit :-(
« Reply #1 on: May 05, 2013, 10:47:00 PM »
Do the axle and wheel bearings agree with the hub? If so than it would be fairly easy to make/modify some wheel spacers.
« Last Edit: December 31, 1969, 04:00:00 PM by ' »
Logged

Offline JaredRM250

  • Posts: 0
    • View Profile
Talon hubs don''''t fit :-(
« Reply #2 on: May 05, 2013, 10:53:13 PM »
Its strange because the crf spacers fit into the rm stock wheel but not vice versa
« Last Edit: December 31, 1969, 04:00:00 PM by ' »
Logged

Offline cnrcpla

  • Novice
  • *
  • Posts: 0
    • View Profile
Talon hubs don''''''''t fit :-(
« Reply #3 on: May 05, 2013, 11:13:31 PM »
As long as the spacers are properly doing there job and keeping the rear sprocket and wheel aligned correctly, then I see no problem in running the hub with the best possible match for spacers you can. That is if the axle and bearings will also work together.
« Last Edit: December 31, 1969, 04:00:00 PM by ' »
Logged

Offline JaredRM250

  • Posts: 0
    • View Profile
Talon hubs don''''''''''''''''t fit :-(
« Reply #4 on: May 06, 2013, 10:11:43 AM »
After ringing around this morning i was broke some bad news, the hub is for the wrong bike so back to square one :(
« Last Edit: December 31, 1969, 04:00:00 PM by ' »
Logged
Pages: [1]   Go Up
« previous next »