alright guys, quick update.
The rear shock has been rebuilt with all new oil and recharged. Also I have finished the radiators and the front brake system. The radiators have been completely straightened and fins have been adjusted back to a straight look, and then high heat coated in satin black. The front caliper has been completely rebuilt as well with all new o-rings, and the master cylinder has also had all o-rings replaced. The replacement of brake fluid is a pain in the butt if you do not have a bleeder. This is one tool that i desperately need. Also I rebuilt the pet**** and it started leaking after i put some gas in the tank, So i will have to pull it apart again and see what the issue is. The bike starts but was running so rich, I couldnt wait to see if the bike would start up so this is the reason why i had put gas in the tank. The bike is in desperate need for a re-jet! I will make sure i post the jetting, because i have not found anything on anywebsite for jetting for high altitude for this RM125.
Ignore my messy Garage and tangled extension cord