who rides what?

[cnrcpla]

how hard can it be to build these bikes?

With good welding skills, time, and all the necessary parts and components, not very. 

[Logan Dewey]

I have a pretty beat up 01 yz125
My dad has a 96 Yamaha Warrior 350.
I wish I had a newer 02 or up yz125 or 08 or up 250f.

[Stusmoke]

I wish I had a newer 02 or up yz125 or 08 or up 250f.

Please tell me the 250f part was a joke

[Logan Dewey]

I wish I had a newer 02 or up yz125 or 08 or up 250f.

Please tell me the 250f part was a joke

I know I know, but I personally kind of enjoy the fuel injected bikes.

[gpnewhouse7]

I wish I had a newer 02 or up yz125 or 08 or up 250f.

Please tell me the 250f part was a joke

I rode an RMZ 250 2011 at weekend and thought it was pretty good fun, however after getting off that onto an old flogged out 2002 SX 125 I realized why I ride two strokes 

[Stusmoke]

I wish I had a newer 02 or up yz125 or 08 or up 250f.

Please tell me the 250f part was a joke

I rode an RMZ 250 2011 at weekend and thought it was pretty good fun, however after getting off that onto an old flogged out 2002 SX 125 I realized why I ride two strokes 

SXs.... I went and had a squiz at the most rooted 1998 125 SX you have ever seen in your life and I'm pretty sure it was actually a 250 anyway. Rusted subframe, hole in the airbox, trimmed front and rear fenders, cracks in both rims, spokes missing, one cylinder head nut missing, no gasket on the base (either that or it was an insanely thin one), rusted exhaust, caved in pipe and the list goes on. In conclusion the most BFed bike I've seen in person for a while. The guy wanted 1200 for it. When I asked about its last top and bottom end job he said he couldn't remember. Oh and he was high as S*** when I rang him up about it.

And that, was the worst sale I have ever followed up.

[Twostrokepower!!!]

1996 Cr125r stroker crank, port work and powervalve work, head work, reeds, 250 suspension, asv levers, 250 back tire, gripper seat, pipe, aluminum clutch plates, protaper bars, applied tripple clams, just  rebuilt, thing gooes tooooo fast!

[twosmoke595]

1996 Cr125r stroker crank, port work and powervalve work, head work, reeds, 250 suspension, asv levers, 250 back tire, gripper seat, pipe, aluminum clutch plates, protaper bars, applied tripple clams, just  rebuilt, thing gooes tooooo fast!

post pics of it!! the mcgrath era cr's are awesome!

[gpnewhouse7]

1996 Cr125r stroker crank, port work and powervalve work, head work, reeds, 250 suspension, asv levers, 250 back tire, gripper seat, pipe, aluminum clutch plates, protaper bars, applied tripple clams, just  rebuilt, thing gooes tooooo fast!

How's it compare to the newer bikes when you're out on the track? I'm looking at getting a 125 at the minute.

[Stusmoke]

1996 Cr125r stroker crank, port work and powervalve work, head work, reeds, 250 suspension, asv levers, 250 back tire, gripper seat, pipe, aluminum clutch plates, protaper bars, applied tripple clams, just  rebuilt, thing gooes tooooo fast!

Hows the headshake working out for you? Settled it down a bit?

[georgia_bulldog94]

I personally have a 06 rm85.. But I wana get a cr250 or even a yz250

[Twostrokepower!!!]

There will be more pics soon, and yeah i managed to get most of the headshake out, Its faster than most new 125's and i can rip it alot better. Perfect bike in every way for me

[alo.pendla]

Me- Ktm 125sx 01
Brother- Ktm 150sx 10
Sister- Apex 100 quad its a 2 stroke
Sisters son- Ktm 50 pro senior

We just love it!

[shanes]

2010 KTM SX 250
2013 SXF 450

also have a KTM SX 50 for my daughter and a Husky SM50 :-}}

[ebolhuis]

Current rides are in the signature.... Would like to try the TM300MX if we could get some more dealers in the States.