Coming Soon
Home > Forum


Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - beckvall

Pages: [1] 2
1
Technical / Re: honda cr 125 head and cylinder
« on: April 30, 2011, 02:05:29 AM »
i cant use ano of it cuz its huge gaps betwen the head pins. gaps betwen cylinder and head

2
Technical / Re: honda cr 125 head
« on: April 29, 2011, 05:23:06 AM »
its in a realy bad shape after it gott a bitt to hott. it has been to a motor grinder and got i fixed befor and that held upp for 4 houers.

a new question. im not realy sure wich year its manufaktured i think its a 03 but im nott soure. cuz i need a new one. http://img543.imageshack.us/img543/2514/dsc04890c.jpg

3
Technical / honda cr 125 head and cylinder
« on: April 28, 2011, 09:50:15 AM »
HI! some days ago i did blow my SRS cylinder head, it cant be used any more =( so now i need a new one. are there anyone that knows a site that sells them? it would be nice with a VHM head. the site must come from the usa. would be greatfull for awnsers! sorry for bad spelling come i from sweden...

4
Technical / Re: race sag static sag
« on: April 19, 2011, 06:20:46 AM »
ok how is the fork supose to behave? my kyb cartride is a bitt soft i thing hos is the sag on them?

5
Technical / Re: race sag static sag
« on: April 18, 2011, 10:40:43 AM »
ok thanks. but there is one more thing. is the rear suspension supose to bottom out?

6
Technical / Re: race sag static sag
« on: April 18, 2011, 12:07:48 AM »
then i need to compress the spring and then i wil gett around 80mm race sag? less free sag less racesag?

7
Technical / Re: race sag static sag
« on: April 14, 2011, 11:11:25 PM »
if i got 28mm free sag and 90mm static sag do i need a softer spring then?

8
Technical / Re: race sag static sag
« on: April 14, 2011, 03:51:40 AM »
if i may borow this thred for a question? i hawe a honda cr 125 tunder by srs. how mutch race sag should i have? and so on? greatfull for awnsers!

9
Technical / Re: honda cr 125 clutch
« on: February 16, 2011, 12:32:17 PM »
where do i get och vin number? :-[

10
Technical / Re: honda cr 125 clutch
« on: January 27, 2011, 10:06:45 AM »
okey but you dont have a quess on the year moddel? its older than 98 atleast :)

11
Technical / honda cr 125 clutch
« on: January 26, 2011, 09:29:04 AM »
hey! my freind broke his clutch center and he i wondering were he can by a new one.
 

and he dosent know wich year moddel it is the one beside is brobebly from a 98 when honda upgraded theire clutches from 6 plate to 7 plates. gratfull for answears :)

12
Technical / Re: '02 CR250 shock
« on: January 02, 2011, 03:41:55 AM »
the honda 125 got kyb shocks but im not sure what brand the 250 got. but the only difference is the stifnes on the springs :)

13
Photos & Videos / Re: Honda cr 125 SRS renovation 22/12-10.
« on: December 22, 2010, 10:13:48 AM »
bump! 22/12-10

14
Technical / Re: honda cr 125 to 500
« on: December 15, 2010, 09:14:37 AM »
allright i can take i pic when i get it back from the engine specialist. i by the Orings at the lokal bearing shop. they hawe all the stuffs from bearings to Orings and more.

15
Open Forum / choose betwen 2 diferent twostroke tuning books help
« on: December 06, 2010, 12:15:58 PM »
hi! i am going to order a twostroke tuning book from the internet and i hawe found 2 books that seems intresting to me.

 the first book is Two-Stroke Performance Tuning BY A graham bell. http://cdon.se/b%C3%B6cker/bell,_a.graham/two-stroke_performance_tuning-4414182
the second is The High-performance Two-stroke Engine by John Dixon.http://cdon.se/b%C3%B6cker/dixon,_john/the_high-performance_two-stroke_engine-642695

witch book is the best to learn from? graham bells book is from 1999 and john dixon´s is from 2005. the teknology har ben improvd so much betwen those years.
im greatfull for your opinions!


Pages: [1] 2