1
General Two Stroke Talk / Re: DIY Honda CR500AF
« on: May 09, 2011, 04:25:27 PM »
Thats looking great for sure. honda...HONDA...CR500 
News:
Like the Phoenix rising from the ashes Two Stroke Motocross is reborn!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
For Sale / Re: Honda CR500 David Bailey Tribute aluminum frame conversion
« on: April 13, 2011, 04:56:33 PM »
Some of my younger riding buddies would say that bike is "tight", which I think, to me means cool or awesome bike
So cooool & awesome bike. Cool & awesome HONDA - 2stroke
I noticed you are in Dallas, me too, where do you guys ride when time permits?
I also noticed you guys do some work on bikes, where are you located in the Dallas area?
So cooool & awesome bike. Cool & awesome HONDA - 2stroke
I noticed you are in Dallas, me too, where do you guys ride when time permits?
I also noticed you guys do some work on bikes, where are you located in the Dallas area?
3
Photos & Videos / Re: Sunday Cruising
« on: April 08, 2011, 09:59:33 AM »
ahh yes the dreaded cow paths, reminds me of back when as a young lad riding in north west texas (a.k.a. the panhandle), there was an old lake and river bed to ride at and occasionally we would go up on the plato's and chase jack rabbits, 5 or 6 guys at very high speeds across the wide open, then all of a sudden at 60 mph you would cross a cow path, sunken about 8 inches, you always had a quick prayer as you tried to bring the front wheel up some 
still good times and you know we never caught those jack rabbits, at 60 mph they could turn on a dime
still good times and you know we never caught those jack rabbits, at 60 mph they could turn on a dime
4
Technical / Re: What have you done for your bike lately
« on: March 31, 2011, 04:47:42 PM »
Thanks Coop, I dont know what I'am doing on 2t, but at least when I fall over I'll look good doing it
I dont know much about bars but if you wanted them enough to trade for them, then they must be good and wow with all the new stuff sounds like you got some work to do, labor of love, right!?
Downonmonday,
new top end, tires, and suspension work, that sounds like your just kicken to get out there and try them out.. and I gotta say nice choice in bike
I dont know much about bars but if you wanted them enough to trade for them, then they must be good and wow with all the new stuff sounds like you got some work to do, labor of love, right!?
Downonmonday,
new top end, tires, and suspension work, that sounds like your just kicken to get out there and try them out.. and I gotta say nice choice in bike
5
Technical / What have you done for your bike lately
« on: March 31, 2011, 01:48:35 PM »
Beings that I got one year older this last tuesday, I am really old now, I decided I would spend my b-day money on a few things for my bike.
Problem is that the items I liked and purchased were more that twice my b-day money isnt that always the case.
I got the loud mouth intake kit, the cycra vented front fender, a 14 tooth front sprocket, soft hooks, the jd kit and two tickets to the supercross event in Irvin Tx this saturday. Not too bad b-day gifts.
So if your b-day was recently, what did you get for your bike and if it wasnt, since spring is in the air, what spring items have you gotten for your bike for this years riding season?
Todd
Problem is that the items I liked and purchased were more that twice my b-day money
isnt that always the case.I got the loud mouth intake kit, the cycra vented front fender, a 14 tooth front sprocket, soft hooks, the jd kit and two tickets to the supercross event in Irvin Tx this saturday. Not too bad b-day gifts.
So if your b-day was recently, what did you get for your bike and if it wasnt, since spring is in the air, what spring items have you gotten for your bike for this years riding season?
Todd
6
Photos & Videos / Re: 1st Race of 2011
« on: March 19, 2011, 07:47:04 AM »
Great pictures, looks and sounds like you had a great time.
7
Technical / Re: CR125 Build up
« on: March 19, 2011, 07:44:03 AM »
congrats on the outcome,
good times ahead
good times ahead
8
General Two Stroke Talk / Re: Leatt Brace
« on: March 16, 2011, 06:04:55 PM »
I tried the leatt on in the cycle gear shop just two days ago, fit pretty good,
but the alpinestar (white one) seemed to fit me better,
seems the small fit better because the back part was against the center of my back
Is that how they fit?
but the alpinestar (white one) seemed to fit me better,
seems the small fit better because the back part was against the center of my back
Is that how they fit?
9
Vintage Two Strokes / Re: So I've decided to harden up !!!
« on: March 14, 2011, 08:12:00 PM »
A most excellent purchase
10
Photos & Videos / Re: Great Mud Race 2005 AMA Supercross Anaheim 1 Main Event
« on: March 14, 2011, 05:15:39 PM »
Great race & more like who could survive
Windham, class act for sure.
Windham, class act for sure.
12
Photos & Videos / Re: 2006 CR125 Build complete!
« on: March 06, 2011, 08:30:27 AM »
ST, that sounds like a great bike you got. Are you still gonna sell one of them?
I had no idea about that history. Thanks for the info.
I had no idea about that history. Thanks for the info.
13
Technical / Re: CR125 Build up
« on: March 06, 2011, 08:27:01 AM »
very cool project
good luck with it
good luck with it
14
For Sale / Re: 2003 Honda CR-250R For Sale $3000.00 Firm
« on: March 06, 2011, 08:24:22 AM »
cool
I've been thinking about getting both in black or gold, but I keep hearing how they scratch easily and when scratched they look terrible.
I've been thinking about getting both in black or gold, but I keep hearing how they scratch easily and when scratched they look terrible.
15
For Sale / Re: 2003 Honda CR-250R For Sale $3000.00 Firm
« on: March 04, 2011, 06:36:38 PM »
I like the new wheels.
So tell us about em.
What brand? Did you purchase them complete?
So tell us about em.
What brand? Did you purchase them complete?