Two Stroke Motocross

Two Stroke Motocross Forum => Technical => Topic started by: eprovenzano on March 23, 2017, 07:45:57 AM

Title: Footpegs What's your choice and why???
Post by: eprovenzano on March 23, 2017, 07:45:57 AM

I'm looking at changing out my stock pegs and am looking for suggestions... 

What are you running... Do you like them, and why...

Title: Re: Footpegs What's your choice and why???
Post by: _X_ on March 23, 2017, 01:47:39 PM

just running ims superstock on the 90's bikes, they are big and cheap. i do have a set of light speed ti pegs on the 03, they are light and wide with good cleat surface, but prone to bending as it happened on my 06 250 cause of a crash.

Title: Re: Footpegs What's your choice and why???
Post by: rsmith on March 23, 2017, 02:59:45 PM

Fastway because they have options for mounting.

I'm 6'2" so I like to run them down and back, makes it just a bit easier going from sitting to standing.

--Ron.

Title: Re: Footpegs What's your choice and why???
Post by: Coop on March 31, 2017, 03:57:50 PM

I have used MSR, IMS (these two are very similar), and Fastway. I like the replaceable grippers on the Fastway but they all worked fine for me. I trials company called S3 makes pegs similar to Fastway for trials bikes and I will probably get those for my Beta.

Title: Re: Footpegs What's your choice and why???
Post by: eprovenzano on April 06, 2017, 11:30:25 AM

After much deliberation I went with the IMS.  What...  No particular reason.. other than I found a set at a really good price..  and I'm a bit of a cheap ass...   :o

Title: Re: Footpegs What's your choice and why???
Post by: TMKIWI on April 08, 2017, 02:03:10 AM

I run Zeta cromol on most of my bikes. cheap wide and sharp.