Two Stroke Motocross

Two Stroke Motocross Forum => Technical => Topic started by: performance1 on July 13, 2013, 06:31:16 PM

Title: Clutch push rod assembly not working
Post by: performance1 on July 13, 2013, 06:31:16 PM
Cleaned and lubed my clutch cable and nothing now it's not working. The assembly can move when I do it manually but won't spring back on its own. Bike is an 05 yz250
Title: Clutch push rod assembly not working
Post by: performance1 on July 13, 2013, 09:01:01 PM
Disregard, I just didn't tighten the cable enough.
Title: Clutch push rod assembly not working
Post by: evo550 on July 14, 2013, 01:04:57 AM
I can't disregard that...SLAP!!
Title: Clutch push rod assembly not working
Post by: Stusmoke on July 14, 2013, 05:19:08 AM
Quote from: evo550 on July 14, 2013, 08:04:57 AM
I can't disregard that...SLAP!!

I heard the crack from here  :P
Title: Clutch push rod assembly not working
Post by: _X_ on July 14, 2013, 08:45:46 PM
ha!