Two Stroke Motocross

Two Stroke Motocross Forum => For Sale => Topic started by: Chazzer on June 02, 2012, 12:41:30 PM

Title: YZ-250 parts
Post by: Chazzer on June 02, 2012, 12:41:30 PM

Parting out the entire bike - a 2000 YZ-250. Frame and sub frame just powdercoated.  Let me know what you need.

Title: YZ-250 parts
Post by: riffraff on June 02, 2012, 07:19:33 PM

why are you parting it out?

Title: YZ-250 parts
Post by: Chazzer on June 02, 2012, 07:43:19 PM

2000 YZ250 parts bike. This was going to be a project bike restoration until we found too many tranny gears should be replaced to do it right - making it cost prohibitive unless you have a tranny. Frame has fresh coat of Charcoal Powder-coat. Cylinder is scored but can be sleeved. Power Values ok, CAM is 3 thous off, with new bearings and arm (at machine shop, kenoconnorracing . com, now and can be balanced to OEM specs for $80. Engine casings good, forks, triple tree, rims, front tire, brakes, seat, new cables, carb cleaned and jetted, clutch is new, swing arm / suspension ok, plastics. The list goes on. Would like to sell the entire thing at once but will part it out as needed. I am not looking to make money on this - just as close to even as I can. Shipping costs will be the actual cost for what you buy. Let me know what you need. Thanks.

Title: YZ-250 parts
Post by: SSGHopkins on June 16, 2012, 10:27:45 AM

how much for the radiators and plastics?

Title: YZ-250 parts
Post by: B-D1215 on June 24, 2012, 02:49:52 PM

How much for the left side of the crank case?

Title: YZ-250 parts
Post by: almedin21 on July 16, 2012, 07:52:13 AM

how much for the frame and subframe? do you have title?
email me please at vegas23@live.com and let me know if you still have it.

Title: YZ-250 parts
Post by: SSGHopkins on August 04, 2012, 07:30:54 PM

has anyone heard back from him?