Two Stroke Motocross

Two Stroke Motocross Forum => Technical => Topic started by: JustRide on September 22, 2011, 06:23:49 PM

Title: Tools needed for top end rebuild?
Post by: JustRide on September 22, 2011, 06:23:49 PM

What tools do i need other than the normal stuff to rebuild the top end of a 2001 CR250R?


Jay

Title: Re: Tools needed for top end rebuild?
Post by: scotty dog on September 22, 2011, 06:42:22 PM

None really, if you have a well stocked tool box you will have all you need, maybe a torque wrench for your head bolts. Although I have never used one and have never had a problem.

Title: Re: Tools needed for top end rebuild?
Post by: JustRide on September 22, 2011, 07:14:37 PM

The more i read about this the easier it looks. This should be a breeze.

Thanks     ;D

Title: Re: Tools needed for top end rebuild?
Post by: overthebars on September 22, 2011, 09:51:15 PM

Depends how easy everything comes apart.  ;D

Title: Re: Tools needed for top end rebuild?
Post by: motoman356 on September 23, 2011, 09:11:49 AM

um just a screwdriver to undo the hoses, a few sockets and open wrenches(10mm-14mm) for the bolts and some needle noses for the circlips. its really quite simple just pick up a basic metric tool set

Title: Re: Tools needed for top end rebuild?
Post by: xandyx on September 23, 2011, 11:35:37 AM

dont' forget a pair of pliers. sometimes it's easyer to pull the piston circlip..

Title: Re: Tools needed for top end rebuild?
Post by: ACMX on September 24, 2011, 07:42:35 PM

socket or wrench set and a screwdriver. :) Have fun