Two Stroke Motocross

TSM Racing => Project YZ => Topic started by: Charles Owens on March 16, 2011, 07:06:14 AM

Title: Handlebar Color
Post by: Charles Owens on March 16, 2011, 07:06:14 AM
Pick your color. :)
We will be going with 7/8" bars, unless I can come up with big bar mounts.
Title: Re: Handlebar Color
Post by: ACMX on March 16, 2011, 09:23:09 AM
What about platinum grey? Thats my favorite.
(http://i91.photobucket.com/albums/k287/mxboy721/protaperevohandlebar.jpg)
Title: Re: Handlebar Color
Post by: Charles Owens on March 16, 2011, 09:50:11 AM
They look good. :)
Title: Re: Handlebar Color
Post by: snook620 on March 16, 2011, 11:13:28 AM
black with red levers  ;D
Title: Re: Handlebar Color
Post by: scotty dog on March 16, 2011, 12:51:52 PM
Black for sure, its gonna have black triple clamps isnt it?
Title: Re: Handlebar Color
Post by: monsteryz125 on March 16, 2011, 05:23:16 PM
are the grips gonna have red in them?
Title: Re: Handlebar Color
Post by: ACMX on March 16, 2011, 11:07:46 PM
for grips i suggest

(http://i91.photobucket.com/albums/k287/mxboy721/protaper_synergy_pillowtop_grips_blu_LG.jpg)

Although the 'no rip tip' propaganda is total BS. It just rips at the seam.
Title: Re: Handlebar Color
Post by: monsteryz125 on March 17, 2011, 04:33:03 AM
yea thats what mine did
Title: Re: Handlebar Color
Post by: MyckMcClung on March 17, 2011, 05:10:45 AM
I voted black,
red grips and levers would be DOPE!!
those pillow "plops" suck
ODI "Ruffian" locking grips are the cats ass but they don't come in red
so Scott MX1 would be my other choice
Title: Re: Handlebar Color
Post by: George on March 17, 2011, 06:04:57 AM
as for grips, renthal kevlar ones have always been the best for me, they never seen to rip at the end when you crash, and they are soft and really long lasting, and im pretty sure i get less vibrations out of them, only down side is the colour
Title: Re: Handlebar Color
Post by: ACMX on March 17, 2011, 09:36:32 AM
yea thats what mine did

Thats what mine have already done 3 times. I'm on my 4th grip/throttle tube.

as for grips, renthal kevlar ones have always been the best for me, they never seen to rip at the end when you crash, and they are soft and really long lasting, and im pretty sure i get less vibrations out of them, only down side is the colour

I was looking at those... But I was really turned away by the color. I care about cosmetics a bit. Plus the pillow tops just feel great. But I still think I should invest in the kevlars because the pillow tops are NOT satisfying after having to change them every couple rides.
Title: Re: Handlebar Color
Post by: Harley Elliott 594 on March 17, 2011, 02:08:59 PM
black eastons
Title: Re: Handlebar Color
Post by: George on March 18, 2011, 07:03:05 AM
The colour of the kevlar renthal grips is a big of a dissapointment, but it grows on you, and they cost about £2 more than a normal grips and last as long as hard compounds but are as comfy as softs, I even dropped a set on my road bike  :P
Title: Re: Handlebar Color
Post by: ACMX on March 18, 2011, 09:22:47 AM
If you want long life I found a pair of 30-40 dollar grips where the throttle tube is attatched and its metal... But then when they wear out its a 30-40 dollar replacement
Title: Re: Handlebar Color
Post by: factoryX on March 25, 2011, 03:11:32 PM
I run pillow tops on almost everything, never had a problem.