Two Stroke Motocross

Two Stroke Motocross Forum => Technical => Topic started by: Seba92mx on November 28, 2013, 11:38:18 PM

Title: YZ125 2006 Front wheel assembly...
Post by: Seba92mx on November 28, 2013, 11:38:18 PM

Hello. In my YZ 125 2006 i have front wheel from some husqvarna.
Wheel doesn't fit very well and front forks aren't symmetric.
Brake disc looks good in brake caliper, but bushing from other side stops on axis (you know, it is bigger on one side)
Black- axis
light gray- bushings
gold- hub
fi25 and fi 20 are diameter of axis.



It should looks like that? Maby I should buy wheel from yz 125?
What should be the dimension between forks (on axis) to it stay symmetrical?

Title: YZ125 2006 Front wheel assembly...
Post by: TMKIWI on November 29, 2013, 06:01:42 AM

You may have to machine up some new wheel spacers.
The forks must sit parallel when the wheel is done up.

Title: YZ125 2006 Front wheel assembly...
Post by: Seba92mx on November 29, 2013, 01:19:12 PM

Ok. But bushing on the left side on picture shouldn't have contact with fork?

What are the dimensions of OEM wheel spacers?