Two Stroke Motocross

Two Stroke Motocross Forum => General Two Stroke Talk => Topic started by: JaredRM250 on May 05, 2013, 10:44:14 PM

Title: Talon hubs don't fit :-(
Post by: JaredRM250 on May 05, 2013, 10:44:14 PM

Hi guys,

A friend of mine is selling a very nice set of wheels but they were off a CRF250 is it possible to get some different spacers to make them fit my 2008 RM250?

Cheers,
Jared.

Title: Talon hubs don''t fit :-(
Post by: cnrcpla on May 05, 2013, 10:47:00 PM

Do the axle and wheel bearings agree with the hub? If so than it would be fairly easy to make/modify some wheel spacers.

Title: Talon hubs don''''t fit :-(
Post by: JaredRM250 on May 05, 2013, 10:53:13 PM

Its strange because the crf spacers fit into the rm stock wheel but not vice versa

Title: Talon hubs don''''''''t fit :-(
Post by: cnrcpla on May 05, 2013, 11:13:31 PM

As long as the spacers are properly doing there job and keeping the rear sprocket and wheel aligned correctly, then I see no problem in running the hub with the best possible match for spacers you can. That is if the axle and bearings will also work together.

Title: Talon hubs don''''''''''''''''t fit :-(
Post by: JaredRM250 on May 06, 2013, 10:11:43 AM

After ringing around this morning i was broke some bad news, the hub is for the wrong bike so back to square one