Two Stroke Motocross

Two Stroke Motocross Forum => General Two Stroke Talk => Topic started by: luthier269 on January 18, 2013, 02:11:45 AM

Title: 2001 cr125 engine cases
Post by: luthier269 on January 18, 2013, 02:11:45 AM

I need help, does any one know what years cr125 engine case would work with a 2001. We lost a counter shaft bearing and it took the case with it. Thanks

Title: 2001 cr125 engine cases
Post by: _X_ on January 18, 2013, 02:26:18 AM

99-02

Title: 2001 cr125 engine cases
Post by: luthier269 on January 18, 2013, 03:05:58 AM

Thanks

Title: 2001 cr125 engine cases
Post by: _X_ on January 18, 2013, 03:17:56 AM

any time, just watch the jo jo video.

Title: 2001 cr125 engine cases
Post by: luthier269 on January 19, 2013, 04:47:23 PM

THE DAMAGE !!!

Title: 2001 cr125 engine cases
Post by: _X_ on January 19, 2013, 06:41:59 PM

i have had that happen to me as well. put the stupid sprocket on backwards.

Title: 2001 cr125 engine cases
Post by: msambuco on January 19, 2013, 10:14:42 PM

Quote from: racer x on January 18, 2013, 11:17:56 AM

any time, just watch the jo jo video.

Don't tease. Is there a JoJo video somewhere I am missing?

Title: 2001 cr125 engine cases
Post by: _X_ on January 19, 2013, 11:15:55 PM

just an old one i reposted.

Title: 2001 cr125 engine cases
Post by: msambuco on January 19, 2013, 11:36:20 PM

Where??? Gotta see it.

Title: 2001 cr125 engine cases
Post by: _X_ on January 19, 2013, 11:46:05 PM

in video forum under-living legend if i could only see him ride one more time.

Title: 2001 cr125 engine cases
Post by: Super Trucker on January 20, 2013, 07:19:22 PM

I would  check  the part #  on  service honda,s  website,  if other  years  don,t match  the part #  of a 01.  Don,t  purchase it.  I would  get  a  01  side case,  if  the  inside  of the cases  is  different.  The  bike will never  run  right.  A   99  was  a 6speed,  02  I think  the case  volume  was  changed,  not   100 %   sure  thow.

Title: 2001 cr125 engine cases
Post by: luthier269 on January 20, 2013, 10:47:36 PM

thanks ST

Title: 2001 cr125 engine cases
Post by: luthier269 on January 20, 2013, 10:58:26 PM

Super trucker Racer-X was right. I looked up the part numbers 1999-2002 are the same 11200-KZ4-L10  Thanks again

Title: 2001 cr125 engine cases
Post by: Super Trucker on January 22, 2013, 12:40:21 AM

Quote from: luthier269 on January 21, 2013, 06:58:26 AM

Super trucker Racer-X was right. I looked up the part numbers 1999-2002 are the same 11200-KZ4-L10  Thanks again

   Alright  good  deal,  never mind  what  I  said  about  a  99  being  a  6 sp,  I was  thinking  about  the  power valve  design,  head up  my  butt  again.  haha

Title: 2001 cr125 engine cases
Post by: dbf498 on January 22, 2013, 10:57:00 PM

You should be okay to use cases from 96 and up. In 96 Honda changed the transmission input bearing on the center case to one that was wider. You'll also need to make sure you use a 96 and newer transmission as the 95 and down have a shorter first gear/transmission input shaft. On a side note the transmissions between 5 speed and 6 speed can be swapped out without any issues. Many Kart racers swap out the 5 speed transmissions to the 6 speed without issues. Keep in mind to use a transmission from 96 and up in a 96 and up case.