Two Stroke Motocross

Two Stroke Motocross Forum => General Two Stroke Talk => Topic started by: tom.erik.brauer on November 14, 2012, 08:06:18 PM

Title: KTM sx 250 03
Post by: tom.erik.brauer on November 14, 2012, 08:06:18 PM

Hi I can pickup a sx 250 03 model for $885 it needs a top end rebuild. Is it worth picking it up as a project bike? Is there a aftermarket cylinder set for it or do I need to turn to KTM for parts?
More expensive with original parts I guess?

Title: KTM sx 250 03
Post by: eprovenzano on November 14, 2012, 08:51:03 PM

It sounds like a great deal, is there an issue with the cylinder?

Title: KTM sx 250 03
Post by: tom.erik.brauer on November 14, 2012, 09:12:37 PM

it`s this bike here : http://www.blocket.se/goteborg/Ktm_sx_250_43757398.htm?ca=15&w=1

My Swedish is not so good but I think it says it needs new piston and cylinder.

Title: KTM sx 250 03
Post by: Jeram on November 14, 2012, 09:26:13 PM

KTM 300SX kit is around 800 USD yes?

that kit bolts straight on and give alot of power

otherwise just hunt around on ebay and you will find a cylinder for a couple hundred dollars

Title: KTM sx 250 03
Post by: tom.erik.brauer on November 14, 2012, 09:56:43 PM

A 300 kit sounds very tempting. FMF fatty pipe or gnarly most suitet for a 300?

Title: KTM sx 250 03
Post by: tom.erik.brauer on November 15, 2012, 10:12:04 PM

Looks like it`s to old to get any 300 kit.
And seems to old for many other things I would like to do with the bike. I think i pass on the bike.

Title: KTM sx 250 03
Post by: ktm111 on November 17, 2012, 01:53:35 AM

I have a head and cycl. for that bike if needed