Two Stroke Motocross

Two Stroke Motocross Forum => General Two Stroke Talk => Topic started by: fabbo on October 29, 2012, 09:12:51 AM

Title: Diamond RG3 Suspension
Post by: fabbo on October 29, 2012, 09:12:51 AM

Hi Guys

Any of you guys out there have Diamond RG3 suspension my new bike comes with it front and back (supposedly 10 grands worth). Fully worked and set up, problem is i have never heard of it. Is it rider freindly to tune ? do I need special tools is any one in Oz sell this stuff? Any info again greatly appreciated. The bike is a fully worked CR 300 2006 model. pick it up next week finally. Never been raced. and she looke awesome will post pics soon as I get it.

Title: Diamond RG3 Suspension
Post by: GlennC on October 29, 2012, 11:16:30 AM

From RG3 web site
CR/CRF250

 

97-09

DIAMOND KIT

 

2510.00

It should have the DLC coating on the fork sliders and shock shaft, as well as custom anodizing on the outer fork tubes and caps.

Title: Diamond RG3 Suspension
Post by: shanes on October 29, 2012, 11:38:22 AM

i have ridden two bikes fitted with it , both handled lovely it was very very good

Title: Diamond RG3 Suspension
Post by: 2T Institute on October 29, 2012, 09:46:36 PM

Only heard good reports about RG3

Title: Diamond RG3 Suspension
Post by: rg3suspension on October 31, 2012, 09:42:07 PM

Contact RG3 Australia for setup questions at jayforemanracing@aol.com or Phone # 61-2496-68097. Also feel free to contact us in the U.S. at 714-630-0786

Best,

RG3 Suspension

Title: Diamond RG3 Suspension
Post by: Super Trucker on November 01, 2012, 08:04:24 PM

I,ve used RG3 ,s top tripple clamp since 01, the t. clamp is awesome. My local track is only worked up for races, practicing it has 12-18in. deep square holes,  you don,t get a shock in your hands and forearms with the RG3 clamp. Much less vibration, less arm pump, etc, You  can ride longer with less fatique, sign up for an extra class. I ordered my clamps with a higher and more foreward  bar clamp, that,s reversable, good stuff .