Two Stroke Motocross

Two Stroke Motocross Forum => Technical => Topic started by: Stusmoke on April 27, 2012, 03:11:49 AM

Title: Compression adjusted issues (left fork)
Post by: Stusmoke on April 27, 2012, 03:11:49 AM

Hey whats up guys sorry for my inactivity of recent times i've had big internet issues.

Okay so I go to adjust my clicker for my 2001 YZ 250, its the left fork if you are sitting on the bike. It clicks just fine, but it goes on forever and makes no difference to the soft or hardness of the fork. The one on the right is fine, it goes for twenty clicks either way so I know theres something ****y with the left one. I was thinking maybe the bearings in it were stripped? Whats everyone elses though?

Thanks for your time,

Stuart

Title: Compression adjusted issues (left fork)
Post by: Stusmoke on May 02, 2012, 07:12:57 AM

Bump! Can anyone help me out a little please?

Title: Compression adjusted issues (left fork)
Post by: msmola2002 on May 02, 2012, 11:13:01 AM

Buy a new fork cap.

Title: Compression adjusted issues (left fork)
Post by: SachsGS on May 02, 2012, 03:11:26 PM

How many hours since you last serviced the front suspension?

Title: Compression adjusted issues (left fork)
Post by: Stusmoke on May 03, 2012, 01:28:50 PM

Probably about 10 or so maybe more. I'm not sure when the previous owner serviced the suspension however so its probably more. Im gonna order in a full service manual tomorrow and go from there. From what I've been able to discern from internet searches if its clicking, it shouldn't be the bearings are stripped. Correct me if im wrong though