Two Stroke Motocross

Two Stroke Motocross Forum => General Two Stroke Talk => Topic started by: Recovered on March 15, 2012, 03:24:12 PM

Title: Honda gurus... Identify these plastics.
Post by: Recovered on March 15, 2012, 03:24:12 PM: This is an 03 CR125. But what plastics are these? The rad shrouds look different. The side plates are smaller. and obviously the front numberplate and fender are.

Is it just everything from about an 08 CRF250? I know in

Stock.
Title: Honda gurus... Identify these plastics.
Post by: twosmoke595 on March 15, 2012, 03:38:54 PM: everything is the exact same as the 03 you posted, except the front # plate, which is a cycra stadium plate, i think its just the way the graphics are, and how the bike is positioned, to me from the shrouds to the rear fender look like stock plastic

and i'm guessing the front fender is from a crf
Title: Honda gurus... Identify these plastics.
Post by: Sheriff on March 15, 2012, 04:06:58 PM: My girlfriend took this picture. This is a 2004 CR125. Front fender is an 08 CRF part, front number plate is Cycra Stadium. Everything else is standard. In fact, the stock graphics are still under the TJ Factory shroud graphics.
Title: Honda gurus... Identify these plastics.
Post by: Recovered on March 15, 2012, 04:28:50 PM: Quote from: Sheriff on March 15, 2012, 11:06:58 PM
My girlfriend took this picture. This is a 2004 CR125. Front fender is an 08 CRF part, front number plate is Cycra Stadium. Everything else is standard. In fact, the stock graphics are still under the TJ Factory shroud graphics.

riding area looks an awful lot like Croom in FL.

Thanks for the input.
Title: Honda gurus... Identify these plastics.
Post by: metal_miracle on March 15, 2012, 05:15:49 PM: everything is stock but.

the front fender and number plate are cyra...
Title: Honda gurus... Identify these plastics.
Post by: Sheriff on March 15, 2012, 05:59:56 PM: Quote from: Premixed on March 15, 2012, 11:28:50 PM
Quote from: Sheriff on March 15, 2012, 11:06:58 PM
My girlfriend took this picture. This is a 2004 CR125. Front fender is an 08 CRF part, front number plate is Cycra Stadium. Everything else is standard. In fact, the stock graphics are still under the TJ Factory shroud graphics.

riding area looks an awful lot like Croom in FL.

Thanks for the input.

Nope. MX Terre Rouge in St-Apollinaire, Canada.
Title: Honda gurus... Identify these plastics.
Post by: Super Trucker on March 15, 2012, 06:24:08 PM: Quote from: Sheriff on March 15, 2012, 11:06:58 PM
My girlfriend took this picture. This is a 2004 CR125. Front fender is an 08 CRF part, front number plate is Cycra Stadium. Everything else is standard. In fact, the stock graphics are still under the TJ Factory shroud graphics.
Very sharp cr,front fender is really close to a stock one. I have the TJ red,white,blue huge wing old school graphics, with TJ factory red,black gripper seat cover,I always put a gripper seat cover over the stock seat cover.
Title: Honda gurus... Identify these plastics.
Post by: Recovered on March 15, 2012, 06:29:55 PM: what year did Honda start doing the front rotor gaurd with the left fork gaurd?
Title: Honda gurus... Identify these plastics.
Post by: Sheriff on March 16, 2012, 04:55:17 PM: Quote from: Premixed on March 16, 2012, 01:29:55 AM
what year did Honda start doing the front rotor gaurd with the left fork gaurd?

It's always been a separate part I believe.
Title: Honda gurus... Identify these plastics.
Post by: twosmoke595 on March 16, 2012, 05:31:43 PM: Quote from: Sheriff on March 16, 2012, 11:55:17 PM
Quote from: Premixed on March 16, 2012, 01:29:55 AM
what year did Honda start doing the front rotor gaurd with the left fork gaurd?

It's always been a separate part I believe.

ya, my buddy with an 03 cr125 has one, and my 07 has one, i'm not sure when they started but i think they've put them on all bike for a while

they're both separate from the left fork guard
Title: Honda gurus... Identify these plastics.
Post by: TotalNZ on March 17, 2012, 01:09:35 AM: Quote from: Premixed on March 16, 2012, 01:29:55 AM
what year did Honda start doing the front rotor gaurd with the left fork gaurd?
They had them stock pretty early on. 1995 CR's had them stock.