Two Stroke Motocross

Two Stroke Motocross Forum => Technical => Topic started by: Twostrokepower!!! on February 27, 2012, 12:26:29 AM

Title: rm125 swingarm differences?
Post by: Twostrokepower!!! on February 27, 2012, 12:26:29 AM

i have a 1995 rm125, and my swingarm went bad, i have a spare one that is off a newer style(not a top mount like the 95) will this work on my bike?

Title: rm125 swingarm differences?
Post by: Twostrokepower!!! on February 29, 2012, 02:53:39 AM

Any ideas at all?

Title: rm125 swingarm differences?
Post by: xandyx on February 29, 2012, 02:51:49 PM

measure the back of your engine to see if you have clearance to your new swingarm, then measure the frame internal space and compare to the swing arm width.

you'll be able to need some washers to clear the gap, or you can get someone to build new teflon/poly bushings to clear the gap if they don't match perfectly.


otherewise, why don't you try ebay for a used swingarm or keepitroostin.com? it will make the job easier and it's not that expensive.

Title: rm125 swingarm differences?
Post by: xandyx on February 29, 2012, 02:55:26 PM

check this out!

http://www.ebay.com/itm/95-RM250-Swingarm-Chain-Guard-Shock-Linkage-RM-125-250-Swing-Arm-Bolt-Suzuki-/120780201487?pt=Motorcycles_Parts_Accessories&hash=item1c1f0f9e0f&vxp=mtr

http://www.ebay.com/itm/93-95-RM250-RM-250-swingarm-swing-arm-2-/180217379999?pt=Motorcycles_Parts_Accessories&hash=item29f5cafc9f&vxp=mtr

there are a few more if you search for 95 rm swingarm, those where the cheaper i found at buy it now!

let us know your choice, then!