Post by: charliec on February 25, 2012, 12:50:34 PM
)anyway ill get to the piont
i will be soon getting an aprillia RS barrell (wich wont be going on an aprillia) to do some porting with (have done this many times so this is not a problem).
but the problem is tuning for a wide powerband. never had to do this before. there are some obvious stuff that i will be looking at
-Exhaust builts for a wide powerband
-flowing of all ports
-checking the reed area
- a less obv one is staggering the transfer ports.
i thought this right be the place were people have experience in tuning for wide powerbands. what extra things could i do to give me a wide powerband? (any case mods would be most welcome too)
cheers, a fellow two stroke moter enthusiast looking for a bit of a hand, charliec
Post by: EJ on February 25, 2012, 01:00:52 PM
Post by: charliec on February 25, 2012, 01:01:33 PM
Post by: SachsGS on February 25, 2012, 04:50:07 PM
Post by: TMKIWI on February 26, 2012, 04:27:09 AM
Post by: charliec on February 29, 2012, 07:02:28 PM
Disabling the powervalve and positioning it in the closed position will certainly soften the hit.
thanks i will do that
i will ask mr - 2T then aswell?
(if you see this 2T im just going to copy and past it, no disrespect!)
Post by: TMKIWI on March 01, 2012, 07:09:20 AM
