Two Stroke Motocross

Two Stroke Motocross Forum => Vintage Two Strokes => Topic started by: VintageBlueSmoke on June 06, 2011, 01:49:50 AM

Title: [WANTED] '86 Honda CR125 right Crankcase Cover
Post by: VintageBlueSmoke on June 06, 2011, 01:49:50 AM
I'm looking for a right crank case cover to finish my '86 Honda CR125 project. The Honda Fish lists it as COVER, R. CRANKCASE 11340-KS6-000. Any information or leads would be appreciated.
Title: Re: [WANTED] '86 Honda CR125 right Crankcase Cover
Post by: Coop on June 07, 2011, 05:25:39 AM
Can't help with the case cover, but a 1986 CR125 was just posted for sale on Pittsburgh craigslist. If you are close could be worth grabbing as a parts bike:

http://pittsburgh.craigslist.org/mcy/2425613632.html (http://pittsburgh.craigslist.org/mcy/2425613632.html)
Title: Re: [WANTED] '86 Honda CR125 right Crankcase Cover
Post by: VintageBlueSmoke on June 07, 2011, 09:29:45 AM
Thanks for the post. That is how I ended up with this motor though...bought sight unseen. All these used Hondas are rotten from what I've found. Looking for NOS. It's expensive but I've bot two bad ones already!

Thanks again though!

Title: Re: [WANTED] '86 Honda CR125 right Crankcase Cover
Post by: Coop on June 07, 2011, 11:44:52 AM
I figured it wasn't much help, but I wanted to try  ;D
Title: Re: [WANTED] '86 Honda CR125 right Crankcase Cover
Post by: KRP-59 on July 01, 2011, 02:50:32 PM
Hi
I'm new on this site but go on mxtrax and vitalmx often.
A friend of mine in the UK is having a batch of CR125 1986 clutch/water pump casings made in aluminium.
He has already had them made for the 1983 CR125. The 83's are top notch and no more rot. I gave him a NOS 86 cover to get copied. They should be ready soon.
Hope this helps.
Title: Re: [WANTED] '86 Honda CR125 right Crankcase Cover
Post by: SachsGS on July 01, 2011, 04:39:29 PM
Just wondering KRP-59,are these side covers sand cast or CNC machined? ;D
Title: Re: [WANTED] '86 Honda CR125 right Crankcase Cover
Post by: VintageBlueSmoke on July 20, 2011, 06:22:42 AM
Please post when they are done. This is such a great EVO bike but they are plagued with these covers.
Title: [WANTED] ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''86 Honda CR125 right Crankcase Cover
Post by: KRP-59 on August 18, 2012, 05:27:37 PM
Quote from: SachsGS on July 01, 2011, 03:39:29 PM
Just wondering KRP-59,are these side covers sand cast or CNC machined? ;D
The covers are cast then all facings, bearing seats and bolt holes cnc'd. They should be ready soon. It's not me having them made but a friend in the UK has a company making them. They are being a little slow about it but they are definitely coming.