Two Stroke Motocross
Two Stroke Motocross Forum => General Two Stroke Talk => Topic started by: ferrahount on May 26, 2011, 08:32:08 AM
-
Sorry if this is folly to ask, but I was trying to find aftermarket parts (like pipes, pipe protectors, levers and the like) for Tm motorcycles, cause I'm evaluating buying a 300 mx. The fact is tha I even found aftermarket (FMF) pipes for Gas Gas, but not for TM.
Anyone have some info on this?
-
The TM is a powerhouse. I don't think you're going to be needing things for the motor like an FMF pipe. If I were you I'd be looking for some asv levers, brakes, rotors, sprockets, suspension. I'm sure most of that you can find parts for, from more common bikes. Don't take my word for it though, good luck!
-
The TM is a powerhouse. I don't think you're going to be needing things for the motor like an FMF pipe. If I were you I'd be looking for some asv levers, brakes, rotors, sprockets, suspension. I'm sure most of that you can find parts for, from more common bikes. Don't take my word for it though, good luck!
Right I've thought that, but a carbon pipe protector or, as you said, asv levers? From wich bike could I borrow them (does the TM match any Japo or Austria bike?)
-
TMs are aftermarket, as far as pipes, reeds, rims, etc.
-
A Pro Circuit pipe for a CR250 will fit with a little mod.
And as burn has said the TM IS a aftermarket bike.
Most parts are easily obtained.
Try these threads.
http://www.dirtbikeworld.net/forum/showthread.php?t=29844 (http://www.dirtbikeworld.net/forum/showthread.php?t=29844)
http://www.thumpertalk.com/forum/showthread.php?t=499330&s=97fe84a163cbaf36f4f14f0f45f9b87d& (http://www.thumpertalk.com/forum/showthread.php?t=499330&s=97fe84a163cbaf36f4f14f0f45f9b87d&)
And good luck. You wont regret it. ;D
-
some after market pipes
http://www.cross-shop.eu/Webshop/index.php?item=pps-racing-auspuffbirne-mx_sx-tm-250_300-_08-10_&action=article&group_id=10000133&aid=6403&lang=DE (http://www.cross-shop.eu/Webshop/index.php?item=pps-racing-auspuffbirne-mx_sx-tm-250_300-_08-10_&action=article&group_id=10000133&aid=6403&lang=DE)
http://www.scalviniracing.it/ita/articoli4_scheda.jsp?idarticolo=M-TM250300C/001&idcatalogo=AWAG
(http://www.scalviniracing.it/ita/articoli4_scheda.jsp?idarticolo=M-TM250300C/001&idcatalogo=AWAG)
http://www.procircuit.com/store/pc/viewPrd.asp?idproduct=27886&idcategory=243 (http://www.procircuit.com/store/pc/viewPrd.asp?idproduct=27886&idcategory=243)
-
Thx guys.
I knew they were aftermarket bikes (DEP exhaust system among other), but you always want to personalize it (levers, decals, etc.)
Mmm, I really want one of those bikes, 300 mx nice.
So, after I change my car (it's a little old already) I'm gonna sell the pig (yes I've sinned with a 450) and put the maney toghether. Would you believe me that one of those bikes sales for aroun $10 thousand here in my country (and not for being a TM, in fact KTM 250 sx is a little more expensive)
-
IllusionGraffix might be able to hook you up with some graphics.
-
(http://i864.photobucket.com/albums/ab207/tmkiwi/ben20scalvini.jpg)
I know what you are saying ferrahount.
Decals you will have to get customised as there is not much available.
Front brake lever is easy as it is a common Nissin Unit (RMZ)
If you are buying a new bike the clutch's are now brembo so should be able to get levers. (The older bikes used AJP master cylinders and there is nothing aftermarket available)
Normal wear and tear items are easy to get, Front pads are KTM, Rear pads are RMZ, Air filter CR250.
Put up a picture when you get it.
-
tm graphics tread
http://twostrokemotocross.com/forum/index.php?topic=2319.msg26369#msg26369 (http://twostrokemotocross.com/forum/index.php?topic=2319.msg26369#msg26369)
and i have seem flex levers on ebay
-
Thanks TMKIWI, and I'll surely post pictures of the monster when I get it!