Two Stroke Motocross

Two Stroke Motocross Forum => Technical => Topic started by: Bioflex on January 19, 2011, 01:49:25 AM

Title: TM Levers and other interchangeability
Post by: Bioflex on January 19, 2011, 01:49:25 AM

Hi Guys,

I have a 2001 TM125 and was unlucky to bust a front brake lever the other day. I've been told that the are the same as Honda CR levels however the guy at the local Honda dealer couldn't find a match.

Anyone got any ideas?

Title: Re: TM Levers and other interchangeability
Post by: MyckMcClung on January 19, 2011, 07:02:46 AM

avs?? or get a nissan master cyl, and your problems are solved

Title: Re: TM Levers and other interchangeability
Post by: metal_miracle on January 19, 2011, 10:03:47 AM

tm use break lever from honda 125/250 think i used 92-07 lever

Title: Re: TM Levers and other interchangeability
Post by: TMKIWI on January 19, 2011, 10:59:46 AM

Try this.

http://www.dirtbikeworld.net/forum/showthread.php?t=29844 (http://www.dirtbikeworld.net/forum/showthread.php?t=29844)
or
http://www.thumpertalk.com/forum/archive/index.php/t-499330.html (http://www.thumpertalk.com/forum/archive/index.php/t-499330.html)

The front brake lever on my 07 is from 01-08 RM125/250.

Quote from: MyckMcClung on January 19, 2011, 07:02:46 AM

get a nissan master cyl, and your problems are solved

TM's use a Brembo caliper & Nisin Master.

I have slowly been compiling a list of parts for my bike but need to go through the invoices and write them down.
Will put them up when i get time.