Two Stroke Motocross

Two Stroke Motocross Forum => Technical => Topic started by: beckvall on November 21, 2010, 11:06:42 AM

Title: honda rear hub
Post by: beckvall on November 21, 2010, 11:06:42 AM

hello! I'm going to replace rear wheel bearings on my honda cr 125 2003 and then sits layers pinned with a "nut" and what's the kind of collar to use?

grateful for answers:)

(http://img442.imageshack.us/img442/7536/dsc04621o.jpg)

Title: Re: honda rear hub
Post by: SachsGS on November 22, 2010, 05:10:53 PM

Honda will sell you the tool to remove the rear wheel bearing retainer collar. Or you could take a grinder and a cutting disc and (carefully) make the tool out of an old socket.

Make sure you soak everything in penetrating oil overnight before trying to remove it.

Title: Re: honda rear hub
Post by: Coop on November 23, 2010, 04:42:25 AM

From the looks of that I would say the previous owner used the old "hammer and punch" technique of removing that collar.