Two Stroke Motocross
Two Stroke Motocross Forum => General Two Stroke Talk => Topic started by: IllusionGrafix on March 26, 2011, 08:29:06 AM
-
Ok guys lets have a vote of which graphics to put on this bike. I have posted pics of each, 1st pic is of the revised 2nd pic is of the originals.
The vote is between the original tsm graphics with the swoosh, and the latest red white and black ones.
Once we settle on design i will do up a proof for charles to approve to make sure all sponsors are included, then i will produce them and send them on their way!
-
The revised graphics
(http://i7.photobucket.com/albums/y288/yzrider3/tsm2.jpg)
-
The originals,
(http://i7.photobucket.com/albums/y288/yzrider3/2STROKEMx2.jpg)
-
I would like the top one better if the black was white, the white was red, and the trim striping were black
I also would like the bottom one better if the black and red were reversed and the top of the tank filler area was white as the sides of the seat are red and maybe put the oil sponsor logo next to the filler
(http://i813.photobucket.com/albums/zz58/cowenz/TSM%20Racing%20YZ%20144%20Project/YZSeat.jpg)
Did a white tank actualize?
-
Im not sure on the plastics. We can def switch the colors around a little bit
-
Hands down the revised version -except instead of "Owens" it should say "Ford" ;D
-
revised 8)
-
HAHA that's funny stuff Ford.
I'm pretty sure that white won the plastic poll.
Can you do a mock up of the origionals like I suggested, and maybe segment the swoosh like the old Yamaha 'Bars and blocks"
just a shroud as an example :-*
I think the guy would did it once they see it. ;)
-
Swoosh looks so old style though... We're going with a 2012 front fender which will make the bike aggressive looking. So I want aggressive looking graphics too :)
-
Revised looks good. It would be nice if the "TwoStrokeMotocross" was bigger.
-
Revised looks good. It would be nice if the "TwoStrokeMotocross" was bigger.
I have to agree. No offense intended, but since this is for a TSM project bike I don't think the IGFX logo should be bigger than, or even as big as, the TSM logo. Just my opinion of course, which doesn't mean much I know ;D .
-
You are right in that this is a project bike for TSM, However we (IGFX) are donating/sponsoring the graphics.... the TSM logo will be the main logo on the shroud, and all sponsors involved on the project will have logos placed on the graphics, including IGFX. Since the graphics are our product, our logo will be #2... just like whoever is donating suspenion services, I'm assuming, will have their company stickers on the forks..... ect. No hard feelings :) But if we could stick to the topic.. these are the 2 sets...... As of now it is looking like most want to go with the revised, so by the end of the week, unless I hear otherwise we will be going with the revised. I will then make 2 different color combos with all of the sponsor logos in place, and we can vote on those, the color combos not logo placement ;), and as soon as we vote on those, I will produce and send!