Two Stroke Motocross

Two Stroke Motocross Forum => Photos & Videos => Topic started by: snowboarderro on February 12, 2011, 04:19:31 AM

Title: kx 250 2003 rebuilt
Post by: snowboarderro on February 12, 2011, 04:19:31 AM: This is my bike for the 2011 nationals

I have a sponsor how give 2800 $ for this season,and i bought some parts

New cilinder
Fmf complete exhaust and pipe(i whanted pro circuit but its hard to get in my country)
pro taper triple clmaps
f3 fastway low boy footpegs
samco hoses
mitaka clucth basket
new plastics
renthal intelilevers
new shift lever
green chain kit
new tires
fork oil,premix oil,spray
i ordered number decals from black heart
rebuilt the shock

and a go pro hd camera.

(http://i1032.photobucket.com/albums/a408/snowboarderro/GOPR0008.jpg)

(http://i1032.photobucket.com/albums/a408/snowboarderro/2011-02-12123325.jpg)

(http://i1032.photobucket.com/albums/a408/snowboarderro/2011-02-12113027.jpg)

(http://i1032.photobucket.com/albums/a408/snowboarderro/2011-02-12112706.jpg)

(http://i1032.photobucket.com/albums/a408/snowboarderro/GOPR0013.jpg)

kx 250 fmf pipe.MP4 (http://www.youtube.com/watch?v=QTMxl6USo4w#)
Title: Re: kx 250 2003 rebuilt
Post by: ford832 on February 12, 2011, 12:30:52 PM: Sweet 8)
Title: Re: kx 250 2003 rebuilt
Post by: snowboarderro on February 12, 2011, 12:47:48 PM: yeah it's amaizing

everbody said are u nuts to put the money on that?

sell it and add the money ,go and buy a new 4 stroke

yeah right :D
Title: Re: kx 250 2003 rebuilt
Post by: Charles Owens on February 12, 2011, 02:46:07 PM: Nice. :)
Title: Re: kx 250 2003 rebuilt
Post by: Ready2rise on February 17, 2011, 08:31:13 AM: hey just kind of curious about the seat/seat foam, is it stock or is it a taller foam? did you just change the cover??? looking to replace my seat but dont know if i should get a taller seat or not. i have an 03' also, does anyone know if an 05+ seat will fit an 03? Nice bike btw!!!
Title: Re: kx 250 2003 rebuilt
Post by: snowboarderro on February 17, 2011, 02:34:48 PM: it's tall seat with black bird seat cover

i recomand changeing it

becouse it gives you a better riding position,

espacially if you are tall,i'm 1.85 m

my foam seat was in bead condion.
Title: Re: kx 250 2003 rebuilt
Post by: snowboarderro on February 17, 2011, 02:39:34 PM: eric from black heart mx

sent me a picture with my number decals

enjoy

(http://i1032.photobucket.com/albums/a408/snowboarderro/IMG00143-20110217-1515.jpg)
Title: Re: kx 250 2003 rebuilt
Post by: Dirt Addict on February 17, 2011, 07:02:20 PM: bike sounds great. i like the backgrounds, but i'm not a fan of the metal mulisha kids...
what series / class are you racing this season?
Title: Re: kx 250 2003 rebuilt
Post by: snowboarderro on February 17, 2011, 11:21:11 PM: i ride mx 1 ,at the nationals series

open class from 125 cc to 520cc
Title: Re: kx 250 2003 rebuilt
Post by: ACMX on February 18, 2011, 09:31:29 AM: Loving those number plate graphics. but if you have any leftover I would go with Factory Effex graphics. Not saying yours look bad, its just that all the punks run around with metal mulisha everything. Could give people the wrong image of you.
Title: Re: kx 250 2003 rebuilt
Post by: snowboarderro on February 18, 2011, 09:59:01 AM: neah...here nobody knows about methal mulisha :d

10x for the advice
Title: Re: kx 250 2003 rebuilt
Post by: Super Trucker on February 18, 2011, 11:10:58 AM: Dang 2,800 bucks you have a great sponsor. I think it,s smart to put money into a bike you like, Looks great, good job.
Title: Re: kx 250 2003 rebuilt
Post by: MyckMcClung on February 18, 2011, 12:21:44 PM: Eric is a great guy, and his graphics are awesome, I am sponsored by Black Heart and got the whole kit for mine, I got the wrong fork gaurd stickers and he got the right ones and sent them in less than a week.
A little tip on the backgrounds, the exhaust side is a pain in the ass, use a hair dryer, and lots of soap/water mix. line up the front lower edge and work it across the middle of the plate then out to the edges. heat it up really good, cause it takes alot of stretching to get it to fit right.Once it's on use the hair dryer to heat the background really well and evaporate the water underneath, as you do this bubbles will for work them into as many big ones as possible as close to the black printed areas. Use a stick pin, or thumbtack to poke a hole in the bubble and squeeze out the air and water, keep at it with the hair dryer till bubble quit appearing.
Unfortunately i still have a spot after two months of riding that wrinkled right at the big bend around the silencer on the back edge, I have heated it up twice and got it to stick back down, but it keeps rising.
Title: Re: kx 250 2003 rebuilt
Post by: snowboarderro on February 19, 2011, 04:25:30 AM: MyckMcClung 10x for the advice, but i have lots of bikes done.

Eric was great,we email-ed a lot, and silly me got my website speld wrong :))

Super Trucker 10x ,i apreciate people who admit they like my work :D

also my sponsor its learning motocross from me ,i make the maintanace and repairs on his bike,so its a fair trade :P
Title: Re: kx 250 2003 rebuilt
Post by: snowboarderro on March 06, 2011, 01:17:54 AM: so i put the graphics on

:D

and then i hand made the graphics for my chest protector

before you say somthing the fenders will be changed soon

(http://i1032.photobucket.com/albums/a408/snowboarderro/2011-03-06094911.jpg)

(http://i1032.photobucket.com/albums/a408/snowboarderro/2011-03-06094854.jpg)

(http://i1032.photobucket.com/albums/a408/snowboarderro/2011-03-06094821.jpg)

(http://i1032.photobucket.com/albums/a408/snowboarderro/2011-03-05121807.jpg)

(http://i1032.photobucket.com/albums/a408/snowboarderro/2011-03-05121757.jpg)

(http://i1032.photobucket.com/albums/a408/snowboarderro/GOPR0058.jpg)

(http://i1032.photobucket.com/albums/a408/snowboarderro/GOPR0053.jpg)

(http://i1032.photobucket.com/albums/a408/snowboarderro/GOPR0048.jpg)

(http://i1032.photobucket.com/albums/a408/snowboarderro/GOPR0041.jpg)

(http://i1032.photobucket.com/albums/a408/snowboarderro/GOPR0040.jpg)

(http://i1032.photobucket.com/albums/a408/snowboarderro/GOPR0039.jpg)

(http://i1032.photobucket.com/albums/a408/snowboarderro/2011-03-06095136.jpg)

(http://i1032.photobucket.com/albums/a408/snowboarderro/2011-03-06095103.jpg)

(http://i1032.photobucket.com/albums/a408/snowboarderro/2011-03-06095013.jpg)

ohh and we bought that rm 125 from 2004 with brand new cylinder and fmf pipe for just 1000 Euros =)) (1250 $)
Title: Re: kx 250 2003 rebuilt
Post by: MyckMcClung on March 06, 2011, 05:50:09 AM: Good job, I know that right side plate is a pain
Title: Re: kx 250 2003 rebuilt
Post by: snowboarderro on March 06, 2011, 12:00:53 PM: MyckMcClung i installed them with no hair dryer :P
Title: Re: kx 250 2003 rebuilt
Post by: ACMX on March 06, 2011, 12:21:11 PM: Bike looks great! Thats a killer deal you got on that RM!
Title: Re: kx 250 2003 rebuilt
Post by: snowboarderro on March 06, 2011, 01:01:08 PM: so becouse the bike was awsome i whent training

(http://i1032.photobucket.com/albums/a408/snowboarderro/2011-03-06152101.jpg)

(http://i1032.photobucket.com/albums/a408/snowboarderro/2011-03-06152133.jpg)

(http://i1032.photobucket.com/albums/a408/snowboarderro/2011-03-06152112.jpg)

(http://i1032.photobucket.com/albums/a408/snowboarderro/2011-03-06161553.jpg)

(http://i1032.photobucket.com/albums/a408/snowboarderro/2011-03-06173936.jpg)
Title: Re: kx 250 2003 rebuilt
Post by: ACMX on March 06, 2011, 01:34:34 PM: That mud looked damn sticky! glad you got the bike purdy again!
Title: Re: kx 250 2003 rebuilt
Post by: snowboarderro on March 06, 2011, 02:08:49 PM: yup,we have a fucked up dirt :))

if you dont ride it like you stol it

then you will have twice the weight of the bike
Title: Re: kx 250 2003 rebuilt
Post by: snowboarderro on March 07, 2011, 01:27:20 PM: a short video

me fighting the mud

kx250 antrenament la Baicoi.mp4 (http://www.youtube.com/watch?v=NcMJDeOX5JM#)
Title: Re: kx 250 2003 rebuilt
Post by: TMKIWI on March 07, 2011, 04:38:01 PM: Yep. I would call that muddy. ;D
Title: Re: kx 250 2003 rebuilt
Post by: ACMX on March 08, 2011, 09:29:23 AM: haha, looks fun.
Title: Re: kx 250 2003 rebuilt
Post by: snowboarderro on March 08, 2011, 10:53:47 AM: yes it is,but it's very hard to ride after the winter

i go 3,4 times a week at gym,and i run everyday

but still its not enough :P
Title: Re: kx 250 2003 rebuilt
Post by: snowboarderro on March 13, 2011, 03:05:27 PM: today i whent practice

it seems i nedd new clutch disks after the muddy conditions

enjoy

baicoi 13.03.2011.mp4 (http://www.youtube.com/watch?v=0eKPaNmLAAM#ws)
Title: Re: kx 250 2003 rebuilt
Post by: ACMX on March 13, 2011, 07:20:06 PM: That track looks super fun/dangerous! ;D
Title: Re: kx 250 2003 rebuilt
Post by: snowboarderro on March 14, 2011, 02:01:28 AM: yes it is,2 years ago it was made to ride it clockwise.

new its counterclocwise

it was so dangerous that lots of riders broke something

and the Federation said if they dont change it they will ban it :))
Title: Re: kx 250 2003 rebuilt
Post by: MyckMcClung on March 16, 2011, 06:18:42 AM: Jeeze man what's that thing geared at, 12/50? lol :P
Title: Re: kx 250 2003 rebuilt
Post by: ACMX on March 16, 2011, 09:25:19 AM: Can someone give me a run-down on gearing?
Title: Re: kx 250 2003 rebuilt
Post by: snowboarderro on March 16, 2011, 09:56:48 AM: MyckMcClung the cluth failed :P

and it is 13-49

i guess the new pipe,lot of mud new gearing was the death of the clutch :))
Title: Re: kx 250 2003 rebuilt
Post by: MyckMcClung on March 17, 2011, 05:50:55 AM: Close enough,lmao, I geared mine down to 14/50, major improvement in all gears, I can actually use first gear now.
Title: Re: kx 250 2003 rebuilt
Post by: snowboarderro on March 20, 2011, 02:23:31 PM: today i was at the first race of the season

to bad i got a big crash....

hope i get well til next week so i can race dispate the fact that i don look well

Clip GOPR0443 Segment100 11 49 00 12 23 (http://www.youtube.com/watch?v=KaYxKL7XiWg#)

i will post the qualifing laps as sooon as i uploaded it
Title: Re: kx 250 2003 rebuilt
Post by: TMKIWI on March 20, 2011, 05:26:57 PM: ouch!!! :o

You ok ?
Title: Re: kx 250 2003 rebuilt
Post by: ACMX on March 20, 2011, 10:48:14 PM: Yikes! Whats the damage?
Title: Re: kx 250 2003 rebuilt
Post by: snowboarderro on March 21, 2011, 12:48:54 AM: the damage is only me

my hands ,right foot and left shoulder hurts

the bike has only some minor scratches

hope to be able to race this weekend

i'm not that bad hurt,but i'm all over my body so i can't do anything witout something hurting me
Title: Re: kx 250 2003 rebuilt
Post by: snowboarderro on March 21, 2011, 01:29:15 AM: concurs sf gheorghe 2011 (http://www.youtube.com/watch?v=494rrGdIW7Q#)

here you can see my kicking 4 stroke asses

this is from practice
Title: Re: kx 250 2003 rebuilt
Post by: Coop on March 21, 2011, 03:40:11 AM: That crash looked painful. I hope you heal quick!
Title: Re: kx 250 2003 rebuilt
Post by: snowboarderro on March 21, 2011, 10:03:58 AM: 10x coop ,

i have to get well,becouse sunday is round 2
Title: Re: kx 250 2003 rebuilt
Post by: snowboarderro on March 27, 2011, 02:01:17 PM: hey guys

after the crash from last weekend, i'm not recoverd yet but not that much sore

so i decided to race today

my foot fit in the boot :)),i got a wrist brace,and lots of icy hot :D

Motocross Prundu 2011 (amatori/veterani ,prima mansa) (http://www.youtube.com/watch?v=q9Sk_4HcBpI#)

i didn't had space for the second heat race on my go pro

so in the end 2 very bad starts(the practice was perfect...)

and i got back in the race and pass some people 8)

conclusion a bad leg,wrist and shoulder + 2 bad starts = 2t kicking 4t ass =))
Title: Re: kx 250 2003 rebuilt
Post by: ACMX on March 27, 2011, 09:09:32 PM: Good job! You kicked butt.
Title: Re: kx 250 2003 rebuilt
Post by: snowboarderro on March 27, 2011, 11:09:51 PM: Quote from: ACMX on March 27, 2011, 09:09:32 PM
Good job! You kicked butt.

10x :D