Two Stroke Motocross

Two Stroke Motocross Forum => General Two Stroke Talk => Topic started by: anthony.bennett.1840 on May 28, 2013, 06:20:26 AM

Title: 2013 crf plastics conversion to CR's
Post by: anthony.bennett.1840 on May 28, 2013, 06:20:26 AM

So I've been experimenting with the 2013 Crf450r plastics fitting the 02-07 cr125 / 250 's. I plan on making brackets out of 6061 (T6) aluminum and selling a few on eBay. Before I begin this endeavor I was wanting to gauge the market/demand (as well as the holy crap that's SICK) so below I've posted the phoobucket link to a few pics of my 2002 Cr125. Please check them out, spread the word, let me know what you think.

Happy viewing,
Anthony Bennett






URL=http://s1213.photobucket.com/user/kennethmoss/media/EBD27986-8422-4C8F-B3B5-721F68989FB9-1507-0000016791F5264C_zps68bedf2e.jpg.html][/URL]


http://i1213.photobucket.com/albums/cc480/kennethmoss/EBD27986-8422-4C8F-B3B5-721F68989FB9-1507-0000016791F5264C_zps68bedf2e.jpg

http://i1213.photobucket.com/albums/cc480/kennethmoss/82B3C459-7133-4015-88AD-702A5C4EDEB7-1507-000001677FCD8420_zps3b90eb47.jpg

http://i1213.photobucket.com/albums/cc480/kennethmoss/FF0AEF17-EA1E-43CF-92B9-20CA01561A8C-1507-0000016768A44597_zpseb807992.jpg

Title: 2013 crf plastics conversion to CR''s
Post by: vetman on May 28, 2013, 08:14:38 AM

looks good

Title: 2013 crf plastics conversion to CR''''s
Post by: TotalNZ on May 28, 2013, 09:40:11 AM

Looks good, not sure about the seat, tank, shroud transition though. Whats it feel like too ride?

Title: 2013 crf plastics conversion to CR''''''''s
Post by: Coop on May 28, 2013, 11:06:09 AM

Since you want to sell these and you didn't just make it for yourself I'll be blunt. That gap at the seat/tank looks bad.

Title: 2013 crf plastics conversion to CR''''''''''''''''s
Post by: evo550 on May 28, 2013, 12:33:00 PM

looks to me to be just a mock up at this stage, but has potential. Airbox problems?

Title: 2013 crf plastics conversion to CR''''''''''''''''''''''''''''''''s
Post by: scotty dog on May 28, 2013, 02:15:07 PM

Would love my CR to look like that! Was it alot if work to do this? What parts did you use?

Title: 2013 crf plastics conversion to CR''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s
Post by: anthony.bennett.1840 on May 28, 2013, 03:00:17 PM

Yes its just a Mock up at this point. I'm not happy with the seat either. I'm goin to look into making a mold from a 13 tank thank will fit like a cover and bolt between the top shroud bolts and the seat holder. The air box cover was not part of the plastics kit so I was borrowing a friends. Im hoping to have a rideable setup and the brackets assembled within a few weeks. The plastics have to be cut but nothin crazy. I wouldn't sell the kit till I've tested the brackets durability (and I have a nack for destroying things)and have a tank cover.
 

Title: 2013 crf plastics conversion to CR''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s
Post by: factoryX on May 28, 2013, 05:44:55 PM

How about posting some pics with better lighting? Looks pretty good