Two Stroke Motocross

Two Stroke Motocross Forum => Photos & Videos => Topic started by: Nospeed on April 27, 2011, 04:56:16 AM

Title: CR250 Rippin in FL
Post by: Nospeed on April 27, 2011, 04:56:16 AM

Here is a short video of my kid rippin his CR250 at Waldo and Bostwick in FL.

http://www.youtube.com/watch?v=ZnHAeI2IjZ0

Title: Re: CR250 Rippin in FL
Post by: MyckMcClung on April 27, 2011, 08:43:01 AM

Kids got some skill!!

Title: Re: CR250 Rippin in FL
Post by: EJ on April 27, 2011, 09:01:01 AM

Nice stuff.

Title: Re: CR250 Rippin in FL
Post by: ACMX on April 27, 2011, 09:30:48 AM

Fast guy!

Title: Re: CR250 Rippin in FL
Post by: Nospeed on April 27, 2011, 03:51:20 PM

Thanks. He was on a Honda CRF250 until late last year. The four stroke was nice to ride but, as everyone on this site knows, costs too much to make it competitive. All the fast guys had thousands in motorwork to make it faster. The 05 CR250 with a pipe keeps up to the big $$ mod 250F's with no problem.

Title: Re: CR250 Rippin in FL
Post by: TMKIWI on April 27, 2011, 06:55:07 PM

Nice riding.

Title: Re: CR250 Rippin in FL
Post by: Coop on April 28, 2011, 04:15:06 AM

Good stuff.

Title: Re: CR250 Rippin in FL
Post by: Super Trucker on April 28, 2011, 01:58:29 PM

The kids rippen, sounds crisp too. I know a  expert rider that has a couple cr250,s  his dad  said with the rad valve  the cr250 comes out of corners  stronger than the vforce  reed cage. I put a rad valve on my 06 cr125, nice improvement over the stock cage, low to mid is better, I  took it  apart and polished the inside smooth, then  put the rad valve on,good stuff.

Title: Re: CR250 Rippin in FL
Post by: Nospeed on April 28, 2011, 06:35:10 PM

Quote from: Super Trucker on April 28, 2011, 01:58:29 PM

The kids rippen, sounds crisp too. I know a  expert rider that has a couple cr250,s  his dad  said with the rad valve  the cr250 comes out of corners  stronger than the vforce  reed cage. I put a rad valve on my 06 cr125, nice improvement over the stock cage, low to mid is better, I  took it  apart and polished the inside smooth, then  put the rad valve on,good stuff.

Good input, thanks